For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-0410-02 | Black-coated solid carbide drill | 0.41 | 2.6 | 4 | 50 | 118° | Standard |
| DC836-0420-02-01 | Black-coated solid carbide drill | 0.42 | 1.9 | 4 | 50 | 140° | Standard |
| DC836-0420-04-02Repeat order | Black-coated solid carbide drill | 0.42 | — | — | — | 120° | View full callout |
| DC836-0425-04-01 | Black-coated solid carbide drill | 0.425 | — | — | — | 138° | View full callout |
| DC836-0430-03-01 | Bronze-coated solid carbide drill | 0.43 | — | — | — | 90° | View full callout |
| DC836-0430-04-01Repeat order | Black-coated solid carbide drill | 0.43 | — | — | — | 120° | View full callout |
| DC836-0430-T01 | Bronze-coated solid carbide drill (YZ variant) | 0.43 | 3 | 4 | 50 | 130° | Standard |
| DC836-0450-03-01 | Bronze-coated solid carbide drill | 0.45 | 5 | 4 | 50 | — | Standard |
| DC836-0460-T01 | Bronze-coated solid carbide drill | 0.46 | 5 | 4 | 50 | — | Standard |
| DC836-0470-T01 | Bronze-coated solid carbide drill (YZ variant) | 0.47 | 5 | 4 | 50 | — | Standard |
| DC836-0480-03-01 | Bronze-coated solid carbide drill | 0.48 | 15 | 4 | 50 | 118° | Standard |
| DC836-0500-03-02Repeat order | Bronze-coated solid carbide drill | 0.5 | 5 | 4 | 50 | — | Standard |
| DC836-0500-03-04 | Bronze-coated solid carbide drill | 0.5 | 5 | 4 | 50 | 118° | Standard |
| DC836-0500-03-06 | Bronze-coated solid carbide drill | 0.5 | — | — | — | — | View full callout |
| DC836-0500-04-01 | Black-coated solid carbide drill | 0.5 | 7 | 4 | 38 | — | Standard |
| DC836-0500-04-02 | Black-coated solid carbide drill | 0.5 | — | — | — | — | View full callout |
| DC836-0500-04-03 | Black-coated solid carbide drill | 0.5 | 1.6 | 4 | 50 | 90° | Standard |
| DC836-0500-04-06 | Black-coated solid carbide drill | 0.5 | — | — | — | 118° | View full callout |
| DC836-0500-20-01 | Bronze-coated solid carbide drill | 0.5 | — | — | — | 158° | View full callout |
| DC836-0510-03-01 | Bronze-coated solid carbide drill | 0.51 | 2.5 | 4 | 40 | 120° | Standard |
| DC836-0510-04-01 | Black-coated solid carbide drill | 0.51 | 2.6 | 4 | 50 | — | Standard |
| DC836-0515-04-01 | Black-coated solid carbide drill | 0.515 | 2.5 | 4 | 50 | 136° | Standard |
| DC836-0520-04-02 | Black-coated solid carbide drill | 0.52 | 2.4 | 4 | 50 | — | Standard |
| DC836-0520-04-04 | Black-coated solid carbide drill | 0.52 | 2 | 4 | 50 | 140° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.