For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-7800-03-02 | Bronze-coated solid carbide drill | 7.8 | 41 | 8 | 79 | — | Standard |
| DC836-8000-03-01 | Bronze-coated solid carbide drill | 8 | 30 | 8 | 60 | — | Standard |
| DC836-8200-03-01 | Bronze-coated solid carbide drill | 8.2 | 34 | 10 | 75 | — | Standard |
| DC836-8400-03-01 | Bronze-coated solid carbide drill | 8.4 | 34 | 10 | 75 | — | Standard |
| DC836-8500-03-01 | Bronze-coated solid carbide drill | 8.5 | 34 | 10 | 75 | — | Standard |
| DC836-8600-03-01 | Bronze-coated solid carbide drill | 8.6 | 36 | 10 | 75 | — | Standard |
| DC836-8700-03-01 | Bronze-coated solid carbide drill | 8.7 | 36 | 10 | 75 | — | Standard |
| DC836-8700-03-02 | Bronze-coated solid carbide drill | 8.7 | 47 | 10 | 89 | 118° | Standard |
| DC836-9000-03-01 | Bronze-coated solid carbide drill | 9 | 36 | 10 | 75 | — | Standard |
| DC836-9000-13-02 | Bronze-coated solid carbide drill | 9 | — | — | — | 118° | View full callout |
| DC836-9100-04-02 | Black-coated solid carbide drill | 9.1 | 40 | 10 | 75 | — | Standard |
| DC836-9200-03-01 | Bronze-coated solid carbide drill | 9.2 | 38 | 10 | 75 | — | Standard |
| DC836-9300-03-01 | Bronze-coated solid carbide drill | 9.3 | 38 | 10 | 75 | — | Standard |
| DC836-9500-03-01 | Bronze-coated solid carbide drill | 9.5 | 38 | 10 | 75 | — | Standard |
| DC836-9500-03-02 | Bronze-coated solid carbide drill | 9.5 | 47 | 10 | 89 | — | Standard |
| DC836-9800-04-02 | Black-coated solid carbide drill | 9.8 | 15 | 10 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.