For process engineers
The table is a production record, not a sales range.
HDC326 — Solid carbide drill (not for shrink-fit holders)
A real production series with 507 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 507
- Diameter span
- 0.03–4.1 mm
- Coating
- Uncoated
Part numbers in HDC326
507 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC326-0550-05 | Solid carbide drill (not for shrink-fit holders) | 0.55 | 8.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0550-06 | Solid carbide drill (not for shrink-fit holders) | 0.55 | 12 | 3.175 | 38 | 118° | Standard |
| HDC326-0550-12 | Solid carbide drill (not for shrink-fit holders) | 0.55 | — | — | — | 118° | View full callout |
| HDC326-0560-04 | Solid carbide drill (not for shrink-fit holders) | 0.56 | — | — | — | 118° | View full callout |
| HDC326-0570 | Solid carbide drill (not for shrink-fit holders) | 0.57 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0570-02 | Solid carbide drill (not for shrink-fit holders) | 0.57 | 5 | 3 | 38 | 118° | Standard |
| HDC326-0570-03 | Solid carbide drill (not for shrink-fit holders) | 0.57 | — | — | — | — | View full callout |
| HDC326-0570-04 | Solid carbide drill (not for shrink-fit holders) | 0.57 | 3 | 3 | 38 | 118° | Standard |
| HDC326-0570-05 | Solid carbide drill (not for shrink-fit holders) | 0.57 | 12 | 3.175 | 38 | 118° | Standard |
| HDC326-0570-06 | Solid carbide drill (not for shrink-fit holders) | 0.57 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0580-07 | Solid carbide drill (not for shrink-fit holders) | 0.58 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0590-02 | Solid carbide drill (not for shrink-fit holders) | 0.59 | 7 | 3 | 38 | 118° | Standard |
| HDC326-0590-04 | Solid carbide drill (not for shrink-fit holders) | 0.59 | — | — | — | — | View full callout |
| HDC326-0590-05 | Solid carbide drill (not for shrink-fit holders) | 0.59 | — | — | — | 118° | View full callout |
| HDC326-0595-01Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.595 | — | — | — | 118° | View full callout |
| HDC326-0600-04 | Solid carbide drill (not for shrink-fit holders) | 0.6 | 3 | 3 | 38 | 118° | Standard |
| HDC326-0600-05 | Solid carbide drill (not for shrink-fit holders) | 0.6 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0600-08Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.6 | 5 | 3 | 38 | 118° | Standard |
| HDC326-0600-10 | Solid carbide drill (not for shrink-fit holders) | 0.6 | — | — | — | 118° | View full callout |
| HDC326-0600-11 | Solid carbide drill (not for shrink-fit holders) | 0.6 | — | — | — | 118° | View full callout |
| HDC326-0600-12 | Solid carbide drill (not for shrink-fit holders) | 0.6 | 7 | 3 | 38 | 118° | Standard |
| HDC326-0600-17 | Solid carbide drill (not for shrink-fit holders) | 0.6 | 4 | 3.175 | 38 | 130° | Standard |
| HDC326-0605 | Solid carbide drill (not for shrink-fit holders) | 0.605 | 6 | 3.175 | 38 | 118° | Standard |
| HDC326-0610-03 | Solid carbide drill (not for shrink-fit holders) | 0.61 | 7 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.