For process engineers
The table is a production record, not a sales range.
HDC326 — Solid carbide drill (not for shrink-fit holders)
A real production series with 507 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 507
- Diameter span
- 0.03–4.1 mm
- Coating
- Uncoated
Part numbers in HDC326
507 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC326-0615 | Solid carbide drill (not for shrink-fit holders) | 0.615 | 8 | 3.175 | 38 | 118° | Standard |
| HDC326-0615-01 | Solid carbide drill (not for shrink-fit holders) | 0.615 | — | — | — | 118° | View full callout |
| HDC326-0620-04 | Solid carbide drill (not for shrink-fit holders) | 0.62 | 7 | 3.175 | 38 | 118° | Standard |
| HDC326-0620-05 | Solid carbide drill (not for shrink-fit holders) | 0.62 | 8 | 3.175 | 38 | 118° | Standard |
| HDC326-0620-07 | Solid carbide drill (not for shrink-fit holders) | 0.62 | 9 | 3.175 | 38 | 118° | Standard |
| HDC326-0620-09 | Solid carbide drill (not for shrink-fit holders) | 0.62 | — | — | — | — | View full callout |
| HDC326-0620-10 | Solid carbide drill (not for shrink-fit holders) | 0.62 | 8 | 3 | 38 | 118° | Standard |
| HDC326-0625-01 | Solid carbide drill (not for shrink-fit holders) | 0.625 | — | — | — | 118° | View full callout |
| HDC326-0630-01 | Solid carbide drill (not for shrink-fit holders) | 0.63 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0630-02 | Solid carbide drill (not for shrink-fit holders) | 0.63 | — | — | — | — | View full callout |
| HDC326-0630-03 | Solid carbide drill (not for shrink-fit holders) | 0.63 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0630-05 | Solid carbide drill (not for shrink-fit holders) | 0.63 | 4 | 3 | 38 | 118° | Standard |
| HDC326-0640-01 | Solid carbide drill (not for shrink-fit holders) | 0.64 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0640-02 | Solid carbide drill (not for shrink-fit holders) | 0.64 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0640-03 | Solid carbide drill (not for shrink-fit holders) | 0.64 | — | — | — | 118° | View full callout |
| HDC326-0645 | Solid carbide drill (not for shrink-fit holders) | 0.645 | — | — | — | 118° | View full callout |
| HDC326-0650 | Solid carbide drill (not for shrink-fit holders) | 0.65 | — | — | — | 118° | View full callout |
| HDC326-0650-06 | Solid carbide drill (not for shrink-fit holders) | 0.65 | 7 | 3.175 | 38 | 118° | Standard |
| HDC326-0650-07 | Solid carbide drill (not for shrink-fit holders) | 0.65 | 9.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0650-08 | Solid carbide drill (not for shrink-fit holders) | 0.65 | 12 | 3.175 | 38 | 118° | Standard |
| HDC326-0650-09Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.65 | 8.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0650-11 | Solid carbide drill (not for shrink-fit holders) | 0.65 | — | — | — | — | View full callout |
| HDC326-0655 | Solid carbide drill (not for shrink-fit holders) | 0.655 | — | — | — | 118° | View full callout |
| HDC326-0660-02 | Solid carbide drill (not for shrink-fit holders) | 0.66 | 7 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.