ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Micro drills · series DC626

DC626 — Left-hand solid carbide drill

27 catalogue part numbers, measured diameters from 0.46 to 7.5 mm, primary coating uncoated.

Diameter range0.46–7.5mm
CoatinguncoatedPrimary coating
Part numbers27on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeDC626
DescriptionLeft-hand solid carbide drill
Tooling familyMicro drills
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.46–7.5 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record27

02Part number matrix

27 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
DC626-2431Left-hand solid carbide drill3.2————uncoatedD3.2+0.7*1.3
DC626-2386Left-hand solid carbide drill2.398338120.0°uncoatedD2.386*8*3*38*120°
DC626-0474Left-hand solid carbide drill0.475.8130—uncoatedD0.474*5.8*1*30
DC626-0920Left-hand solid carbide drill0.928450135.0°uncoatedD0.92*8*4*50*135°
DC626-4000Left-hand solid carbide drill430460—uncoatedD4.00*30*4*60
DC626-7500Left-hand solid carbide drill7.530755118.0°uncoatedD7.50*30*7*55*118°
DC626-6960Left-hand solid carbide drill6.96306.9660118.0°uncoatedD6.96*30*6.96*60*118°
DC626-2780-01Left-hand solid carbide drill2.78203.250118.0°uncoatedD2.78*20*3.2*50*118°
DC626-6910Left-hand solid carbide drill6.91306.9160—uncoatedD6.91*30*6.91*60
DC626-0462Left-hand solid carbide drill0.46———140.0°uncoatedD0.462(+0.003/-0)*7*3*38*140°
DC626-0575-01Left-hand solid carbide drill0.579338—uncoatedD0.575*9*3*38
DC626-2822Left-hand solid carbide drill2.8210450150.0°uncoatedD2.822*10*4*50*150°
DC626-5520Left-hand solid carbide drill5.52———118.0°uncoatedD5.52*25*6*50*118°(RXC)
DC626-3750-01Left-hand straight-shank solid carbide drill3.75253.7550—uncoatedD3.75*25*3.75*50
DC626-3680-02Left-hand solid carbide drill3.68253.6850—uncoatedD3.68*25*3.68*50
DC626-1310Left-hand solid carbide drill1.31———118.0°uncoatedD1.31(+0.003/-0)*4*3*50*118°
DC626-0650Left-hand solid carbide drill0.65———118.0°uncoatedD0.65*5+1.1*10(避空)*3.2*38*118°
DC626-0573Left-hand solid carbide drill0.57————uncoatedD0.573(-0/+0.003)*10.5*3*38
DC626-2600-01Left-hand solid carbide drill2.6163.250—uncoatedD2.60*16*3.2*50
DC626-0750Left-hand solid carbide drill0.7583.238110.0°uncoatedD0.75*8*3.2*38*110°
DC626-3700-02Left-hand solid carbide drill3.725450118.0°uncoatedD3.70*25*4*50*118°
DC626-1403Left-hand solid carbide drill1.4———150.0°uncoatedD1.403(+0.003/-0)*8*3*38*150°
DC626-1043-01Left-hand solid carbide drill1.04———150.0°uncoatedD1.043(+0.003/-0)*8*3*38*150°
DC626-1285Left-hand solid carbide drill1.28103.238118.0°uncoatedD1.285*10*3.2*38*118°
DC626-0970Left-hand solid carbide drill0.974.5338—uncoatedD0.97*4.5*3*38
DC626-1995Left-hand solid carbide drill2————uncoatedD1.995(±0.002)*8*3*38
DC626-1233Left-hand solid carbide drill1.238338118.0°uncoatedD1.233*8*3*38*118°

Showing 27 of 27 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
27 part numbers
In DC626
Geometry callouts in this series
  • D3.2+0.7*1.3 · DC626-2431
  • D2.386*8*3*38*120° · DC626-2386
  • D0.474*5.8*1*30 · DC626-0474
  • D0.92*8*4*50*135° · DC626-0920

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.46–7.5 mm for DC626. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 27 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

DC626 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Micro drills

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series