ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Micro drills · series FC626

FC626 — Left-hand solid carbide drill

26 catalogue part numbers, measured diameters from 0.15 to 6.94 mm, primary coating uncoated.

Diameter range0.15–6.94mm
CoatinguncoatedPrimary coating
Part numbers26on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeFC626
DescriptionLeft-hand solid carbide drill
Tooling familyMicro drills
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.15–6.94 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record26

02Part number matrix

26 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
FC626-0890Left-hand solid carbide drill0.8953.238120.0°uncoatedD0.89*5*3.2*38*120°
FC626-0600Left-hand solid carbide drill0.683.238118.0°uncoatedD0.60*8*3.2*38*118°
FC626-0600-02Left-hand solid carbide drill0.6———118.0°uncoatedD0.6(+0.005/-0)*5*3*38*118°
FC626-0962Left-hand solid carbide drill0.9673.238—uncoatedD0.962*7*3.2*38
FC626-1162Left-hand solid carbide drill1.1673.238—uncoatedD1.162*7*3.2*38
FC626-0800Left-hand solid carbide drill0.83.533.238120.0°uncoatedD0.80*3.53*3.2*38*120°
FC626-0933Solid carbide drill0.933130—uncoatedD0.933*3*1*30
FC626-6920Left-hand solid carbide drill6.9218660—uncoatedD6.92*18*6*60
FC626-6940-01Left-hand solid carbide drill6.94————uncoatedD6.94*20*6*60(H12x7.8-11)
FC626-6930Left-hand solid carbide drill6.9318660—uncoatedD6.93*18*6*60
FC626-0300Left-hand solid carbide drill0.331.53027.0°uncoatedD0.30*3*1.5*30*27°
FC626-0835Left-hand solid carbide drill0.836.5238118.0°uncoatedD0.835*6.5*2*38*118°
FC626-1500-04Left-hand solid carbide drill0.15———10.0°uncoatedD0.15*10°*1.5*30
FC626-1500-06Left-hand solid carbide drill1.53.71.53030.0°uncoatedD1.50*3.7*1.5*30*30°
FC626-0584Left-hand solid carbide drill0.583.51.538—uncoatedD0.584*3.5*1.5*38
FC626-1075Left-hand solid carbide drill1.0741.540—uncoatedD1.075*4*1.5*40
FC626-0405Left-hand solid carbide drill0.4141.538—uncoatedD0.405*4*1.5*38
FC626-1500-02Left-hand solid carbide drill1.5———60.0°uncoatedD1.50*60°*1.5*30
FC626-0584-01Left-hand solid carbide drill0.5851.540—uncoatedD0.584*5*1.5*40
FC626-0584-02Left-hand solid carbide drill0.585.8240—uncoatedD0.584*5.8*2*40
FC626-0302Left-hand solid carbide drill0.34.51.540—uncoatedD0.302*4.5*1.5*40
FC626-0450Left-hand solid carbide cutting tool0.45————uncoatedD0.45*0.42*R0.5*1.5*38
FC626-0650Left-hand solid carbide drill0.655238120.0°uncoatedD0.65*5*2*38*120°
FC626-1047Left-hand solid carbide drill1.057238140.0°uncoatedD1.047*7*2*38*140°
FC626-0584-03Left-hand solid carbide drill0.586240—uncoatedD0.584*6*2*40
FC626-0830Left-hand solid carbide drill0.837.5238118.0°uncoatedD0.83*7.5*2*38*118°

Showing 26 of 26 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
26 part numbers
In FC626
Geometry callouts in this series
  • D0.89*5*3.2*38*120° · FC626-0890
  • D0.60*8*3.2*38*118° · FC626-0600
  • D0.6(+0.005/-0)*5*3*38*118° · FC626-0600-02
  • D0.962*7*3.2*38 · FC626-0962

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.15–6.94 mm for FC626. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 26 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

FC626 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Micro drills

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series