ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Micro drills · series X336

X336 — DLC-coated solid carbide drill

6 catalogue part numbers, measured diameters from 0.44 to 7.95 mm, primary coating DLC.

Diameter range0.44–7.95mm
CoatingDLCPrimary coating
Part numbers6on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeX336
DescriptionDLC-coated solid carbide drill
Tooling familyMicro drills
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.44–7.95 mm
Primary coatingDLC
Application—
Catalogue page—
Part numbers on record6

02Part number matrix

6 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
X336-009007003-06DLC-coated solid carbide drill0.97338—DLCD0.90*7*3*38
X336-012528004-06DLC-coated solid carbide drill1.2528470—DLCD1.25*28*4*70
X336-0170026504-06DLC-coated solid carbide drill—————DLCT07-C-8C
X336-7950-06-01DLC-coated solid carbide drill7.95728120—DLCD7.95*72*8*120
X336-0440-06-01DLC-coated solid carbide drill0.4443.1738—DLCD0.44*4*3.175*38
X336-1535-06-01DLC-coated solid carbide drill1.5363.1738130.0°DLCD1.535*6*3.175*38*130°

Showing 6 of 6 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
DLC
6 part numbers
In X336
Geometry callouts in this series
  • D0.90*7*3*38 · X336-009007003-06
  • D1.25*28*4*70 · X336-012528004-06
  • T07-C-8C · X336-0170026504-06
  • D7.95*72*8*120 · X336-7950-06-01

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.44–7.95 mm for X336. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is DLC. Across the 6 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

X336 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Micro drills

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series