ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Micro drills · series YZ426L

YZ426L — Black-coated extended-length solid carbide drill

6 catalogue part numbers, measured diameters from 0.9 to 1.6 mm, primary coating black.

Diameter range0.9–1.6mm
CoatingblackPrimary coating
Part numbers6on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeYZ426L
DescriptionBlack-coated extended-length solid carbide drill
Tooling familyMicro drills
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.9–1.6 mm
Primary coatingblack
Application—
Catalogue page—
Part numbers on record6

02Part number matrix

6 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
YZ426L-1550-04-02Black-coated extended-length solid carbide drill1.5517350118.0°blackD1.55*17*3*50*118°
YZ426L-1250-04-01Black-coated extended-length solid carbide drill1.2517350118.0°blackD1.25*17*3*50*118°
YZ426L-0900-04-01Black-coated extended-length solid carbide drill0.935365—blackD0.90*35*3*65
YZ426L-1550-04-01Black-coated extended-length solid carbide drill1.5525360140.0°blackD1.55*25*3*60*140°
YZ426L-1050-04-00Black-coated extended-length solid carbide drill1.0517350118.0°blackD1.05*17*3*50*118°
YZ426L-1600-03-01Coated extended-length solid carbide drill1.640380140.0°coatedD1.60*40*3*80*140°

Showing 6 of 6 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

2 coatings on record
black
5 part numbers
In YZ426L
coated
1 part numbers
In YZ426L
Geometry callouts in this series
  • D1.55*17*3*50*118° · YZ426L-1550-04-02
  • D1.25*17*3*50*118° · YZ426L-1250-04-01
  • D0.90*35*3*65 · YZ426L-0900-04-01
  • D1.55*25*3*60*140° · YZ426L-1550-04-01

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.9–1.6 mm for YZ426L. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is black. Across the 6 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

YZ426L is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Micro drills

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series