For process engineers
The table is a production record, not a sales range.
DC326 — Solid carbide drill
A real production series with 542 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 542
- Diameter span
- 0.04–3.175 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.03 mm
Diameter tolerance
-0.003 mm — as stated in the 2026–2027 product catalogue.
Standard diameter range
0.03-3.03 mm
Catalogue reference
2026–2027 product catalogue, printed page P6. The full EDP table is available on request as a PDF.
Typical application
Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics.
Part numbers in DC326
542 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326-0720Repeat order | Solid carbide drill | 0.72 | 8 | 3 | 38 | — | Standard |
| DC326-0724-01 | Solid carbide drill | 0.724 | 1.2 | 3.175 | 38 | 130° | Standard |
| DC326-0725 | Solid carbide drill | 0.725 | 3 | 3.175 | 38 | 130° | Standard |
| DC326-0730 | Solid carbide drill | 0.73 | 8 | 3 | 38 | — | Standard |
| DC326-0730-01 | Solid carbide drill | 0.73 | 5 | 3 | 38 | 130° | Standard |
| DC326-0735-01 | Solid carbide drill | 0.735 | 10 | 3 | 38 | 130° | Standard |
| DC326-0740 | Solid carbide drill | 0.74 | 8 | 3 | 38 | — | Standard |
| DC326-0740-01 | Solid carbide drill | 0.74 | 5 | 3 | 38 | 120° | Standard |
| DC326-0750Repeat order | Solid carbide drill | 0.75 | 8 | 3 | 38 | — | Standard |
| DC326-0750-01 | Solid carbide drill | 0.75 | 4.5 | 3 | 38 | 118° | Standard |
| DC326-0760Repeat order | Solid carbide drill | 0.76 | 8 | 3 | 38 | — | Standard |
| DC326-0760-03 | Solid carbide drill | 0.76 | — | — | — | 118° | View full callout |
| DC326-0762 | Solid carbide drill | 0.762 | 7 | 3 | 50 | 118° | Standard |
| DC326-0770 | Solid carbide drill | 0.77 | 8 | 3 | 38 | — | Standard |
| DC326-0780 | Solid carbide drill | 0.78 | 8 | 3 | 38 | — | Standard |
| DC326-0780-01 | Solid carbide drill | 0.78 | 5 | 3 | 38 | 118° | Standard |
| DC326-0790 | Solid carbide drill | 0.79 | 8 | 3 | 38 | — | Standard |
| DC326-0800Repeat order | Solid carbide drill | 0.8 | 8 | 3 | 38 | — | Standard |
| DC326-0800-02 | Solid carbide drill | 0.8 | — | — | — | 118° | View full callout |
| DC326-0800-04 | Solid carbide drill | 0.8 | 7 | 3 | 38 | — | Standard |
| DC326-0800-05 | Solid carbide drill | 0.8 | 4 | 3 | 38 | 130° | Standard |
| DC326-0810Repeat order | Solid carbide drill | 0.81 | 8 | 3 | 38 | — | Standard |
| DC326-0820Repeat order | Solid carbide drill | 0.82 | 8 | 3 | 38 | — | Standard |
| DC326-0820-02 | Solid carbide drill | 0.82 | 10.2 | 3 | 38 | 130° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.