For process engineers
The table is a production record, not a sales range.
DC326 — Solid carbide drill
A real production series with 542 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 542
- Diameter span
- 0.04–3.175 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.03 mm
Diameter tolerance
-0.003 mm — as stated in the 2026–2027 product catalogue.
Standard diameter range
0.03-3.03 mm
Catalogue reference
2026–2027 product catalogue, printed page P6. The full EDP table is available on request as a PDF.
Typical application
Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics.
Part numbers in DC326
542 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326-0830Repeat order | Solid carbide drill | 0.83 | 8 | 3 | 38 | — | Standard |
| DC326-0840 | Solid carbide drill | 0.84 | 8 | 3 | 38 | — | Standard |
| DC326-0850Repeat order | Solid carbide drill | 0.85 | 8 | 3 | 38 | — | Standard |
| DC326-0860Repeat order | Solid carbide drill | 0.86 | 8 | 3 | 38 | — | Standard |
| DC326-0870 | Solid carbide drill | 0.87 | 8 | 3 | 38 | — | Standard |
| DC326-0880 | Solid carbide drill | 0.88 | 8 | 3 | 38 | — | Standard |
| DC326-0880-02 | Solid carbide drill | 0.88 | 7 | 3 | 50 | 130° | Standard |
| DC326-0890 | Solid carbide drill | 0.89 | 8 | 3 | 38 | — | Standard |
| DC326-0890-02 | Solid carbide drill | 0.89 | 8 | 2 | 45 | — | Standard |
| DC326-0890-04 | Solid carbide drill | 0.89 | 2 | 3 | 38 | 130° | Standard |
| DC326-0900Repeat order | Solid carbide drill | 0.9 | 8 | 3 | 38 | — | Standard |
| DC326-0900-06 | Solid carbide drill | 0.9 | 6 | 3 | 50 | 130° | Standard |
| DC326-0910 | Solid carbide drill | 0.91 | 8 | 3 | 38 | — | Standard |
| DC326-0920Repeat order | Solid carbide drill | 0.92 | 8 | 3 | 38 | — | Standard |
| DC326-0930 | Solid carbide drill | 0.93 | 8 | 3 | 38 | — | Standard |
| DC326-0930-05 | Solid carbide drill | 0.93 | 8 | 3 | 50 | — | Standard |
| DC326-0930-06 | Solid carbide drill | 0.93 | 5 | 3.175 | 38 | 118° | Standard |
| DC326-0940 | Solid carbide drill | 0.94 | 8 | 3 | 38 | — | Standard |
| DC326-0950Repeat order | Solid carbide drill | 0.95 | 8 | 3 | 38 | — | Standard |
| DC326-0960 | Solid carbide drill | 0.96 | 8 | 3 | 38 | — | Standard |
| DC326-0960-02 | Solid carbide drill | 0.96 | 6.5 | 3 | 38 | 118° | Standard |
| DC326-0970Repeat order | Solid carbide drill | 0.97 | 8 | 3 | 38 | — | Standard |
| DC326-0980Repeat order | Solid carbide drill | 0.98 | 8 | 3 | 38 | — | Standard |
| DC326-0980-02 | Solid carbide drill | 0.98 | 1.5 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.