For process engineers
The table is a production record, not a sales range.
DC326 — Solid carbide drill
A real production series with 542 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 542
- Diameter span
- 0.04–3.175 mm
- Coating
- Uncoated
What the catalogue commits to
Production capability
Min. diameter 0.03 mm
Diameter tolerance
-0.003 mm — as stated in the 2026–2027 product catalogue.
Standard diameter range
0.03-3.03 mm
Catalogue reference
2026–2027 product catalogue, printed page P6. The full EDP table is available on request as a PDF.
Typical application
Engineering plastics, copper alloys, stainless steel, aluminium, graphite and ceramics.
Part numbers in DC326
542 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC326-0990Repeat order | Solid carbide drill | 0.99 | 8 | 3 | 38 | — | Standard |
| DC326-1000Repeat order | Solid carbide drill | 1 | 10 | 3 | 38 | — | Standard |
| DC326-1000-04 | Solid carbide drill | 1 | 4 | 3 | 50 | — | Standard |
| DC326-1000-06 | Solid carbide drill | 1 | 8 | 3 | 38 | — | Standard |
| DC326-1000-07 | Solid carbide drill | 1 | 5 | 3 | 38 | — | Standard |
| DC326-1000-09 | Solid carbide drill | 1 | 7.5 | 3 | 50 | — | Standard |
| DC326-1000-10 | Solid carbide drill | 1 | 12 | 3 | 38 | — | Standard |
| DC326-1000-12 | Solid carbide drill | 1 | 3 | 3 | 38 | — | Standard |
| DC326-1000-13 | Solid carbide drill | 1 | — | — | — | 140° | View full callout |
| DC326-1010Repeat order | Solid carbide drill | 1.01 | 10 | 3 | 38 | — | Standard |
| DC326-1020Repeat order | Solid carbide drill | 1.02 | 10 | 3 | 38 | — | Standard |
| DC326-1020-02 | Solid carbide drill | 1.02 | 10.2 | 3 | 38 | — | Standard |
| DC326-1020-03 | Solid carbide drill | 1.02 | 10 | 3 | 50 | 125° | Standard |
| DC326-1030Repeat order | Solid carbide drill | 1.03 | 10 | 3 | 38 | — | Standard |
| DC326-1030-03 | Solid carbide drill | 1.03 | 10 | 3.175 | 38 | 118° | Standard |
| DC326-1040 | Solid carbide drill | 1.04 | 10 | 3 | 38 | — | Standard |
| DC326-1040-02 | Solid carbide drill | 1.04 | 5 | 3 | 38 | — | Standard |
| DC326-1041-01 | Solid carbide drill | 1.041 | 10.2 | 3.175 | 38 | 130° | Standard |
| DC326-1050Repeat order | Solid carbide drill | 1.05 | 10 | 3 | 38 | — | Standard |
| DC326-1060 | Solid carbide drill | 1.06 | 10 | 3 | 38 | — | Standard |
| DC326-1065-01 | Solid carbide drill | 1.065 | 10 | 3 | 38 | 118° | Standard |
| DC326-1070Repeat order | Solid carbide drill | 1.07 | 10 | 3 | 38 | — | Standard |
| DC326-1080 | Solid carbide drill | 1.08 | 10 | 3 | 38 | — | Standard |
| DC326-1090 | Solid carbide drill | 1.09 | 10 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.