For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-1500-04-08 | Black-coated solid carbide drill | 1.5 | 12 | 6 | 50 | 140° | Standard |
| DC836-1500-04-09 | Black-coated solid carbide drill | 1.5 | 17 | 4 | 50 | — | Standard |
| DC836-1500-04-11 | Black-coated solid carbide drill | 1.5 | — | — | — | 118° | View full callout |
| DC836-1500-04-12 | Black-coated solid carbide drill | 1.5 | 10 | 4 | 50 | 118° | Standard |
| DC836-1500-04-13 | Black-coated solid carbide drill | 1.5 | 6 | 4 | 50 | 140° | Standard |
| DC836-1500-06-02 | DLC-coated solid carbide drill | 1.5 | 10 | 4 | 75 | 118° | Standard |
| DC836-1500-08-01 | Coated solid carbide drill | 1.05 | — | — | — | 140° | View full callout |
| DC836-1510-03-01 | Bronze-coated solid carbide drill | 1.51 | 6.5 | 4 | 50 | — | Standard |
| DC836-1520-03-01Repeat order | Bronze-coated solid carbide drill | 1.52 | 8 | 4 | 50 | — | Standard |
| DC836-1520-04-01 | Black-coated solid carbide drill | 1.52 | 12 | 4 | 50 | — | Standard |
| DC836-1520-06 | DLC-coated solid carbide drill | 1.52 | 4.5 | 4 | 50 | 120° | Standard |
| DC836-1520-20-01 | Bronze-coated solid carbide drill | 1.52 | 11 | 4 | 45 | 140° | Standard |
| DC836-1530-04-01 | Black-coated solid carbide drill | 1.53 | 3 | 4 | 40 | 130° | Standard |
| DC836-1540-03-01 | Bronze-coated solid carbide drill | 1.54 | 25 | 4 | 50 | — | Standard |
| DC836-1550-03-01 | Bronze-coated solid carbide drill | 1.55 | 12 | 4 | 50 | — | Standard |
| DC836-1550-04-02 | Black-coated solid carbide drill | 1.55 | — | — | — | 140° | View full callout |
| DC836-1550-15-01 | Black-coated solid carbide drill | 1.55 | 7 | 4 | 75 | 140° | Standard |
| DC836-1595-03-01 | Bronze-coated solid carbide drill | 1.595 | 5 | 4 | 50 | 118° | Standard |
| DC836-1600-02-02 | Black-coated solid carbide drill | 1.6 | — | — | — | 90° | View full callout |
| DC836-1600-02-03 | Black-coated solid carbide drill | 1.6 | 10 | 4 | 50 | 118° | Standard |
| DC836-1600-03-02 | Bronze-coated solid carbide drill | 1.6 | 11 | 4 | 50 | — | Standard |
| DC836-1600-03-03 | Bronze-coated solid carbide drill | 1.6 | 20 | 4 | 50 | — | Standard |
| DC836-1600-03-04Repeat order | Bronze-coated solid carbide drill | 1.6 | 15 | 4 | 50 | — | Standard |
| DC836-1600-03-05 | Bronze-coated solid carbide drill | 1.6 | 15 | 4 | 90 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.