For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-3000-04-02 | Black-coated solid carbide drill | 3 | 20 | 4 | 50 | — | Standard |
| DC836-3000-13-01 | Bronze-coated solid carbide drill | 3 | 18 | 4 | 50 | — | Standard |
| DC836-3010-03-01Repeat order | Bronze-coated solid carbide drill | 3.01 | 20 | 4 | 50 | — | Standard |
| DC836-3020-03-01Repeat order | Bronze-coated solid carbide drill | 3.02 | 20 | 4 | 50 | — | Standard |
| DC836-3020-13-01 | Bronze-coated solid carbide drill | 3.02 | 6 | 4 | 50 | 118° | Standard |
| DC836-3020-20-01 | Bronze-coated solid carbide drill | 3.02 | 15 | 4 | 75 | — | Standard |
| DC836-3030-03-01Repeat order | Bronze-coated solid carbide drill | 3.03 | 20 | 4 | 50 | — | Standard |
| DC836-3040-03-01 | Bronze-coated solid carbide drill | 3.04 | 20 | 4 | 50 | — | Standard |
| DC836-3050-02-01 | Black-coated solid carbide drill | 3.05 | 16 | 6 | 50 | — | Standard |
| DC836-3050-03-03Repeat order | Bronze-coated solid carbide drill | 3.05 | 20 | 4 | 50 | — | Standard |
| DC836-3050-03-04 | Bronze-coated solid carbide drill | 3.05 | 20 | 6 | 65 | — | Standard |
| DC836-3050-04-02Repeat order | Black-coated solid carbide drill | 3.05 | 15 | 4 | 50 | — | Standard |
| DC836-3060-03-01 | Bronze-coated solid carbide drill | 3.06 | 20 | 4 | 50 | — | Standard |
| DC836-3070-03-01 | Bronze-coated solid carbide drill | 3.07 | 20 | 4 | 50 | — | Standard |
| DC836-3080-03-01 | Bronze-coated solid carbide drill | 3.08 | 20 | 4 | 50 | — | Standard |
| DC836-3090-03-01 | Bronze-coated solid carbide drill | 3.09 | 20 | 4 | 50 | — | Standard |
| DC836-3100-03-01Repeat order | Bronze-coated solid carbide drill | 3.1 | 20 | 4 | 50 | — | Standard |
| DC836-3100-03-02Repeat order | Bronze-coated solid carbide drill | 3.1 | 18 | 4 | 50 | — | Standard |
| DC836-3100-03-03 | Bronze-coated solid carbide drill | 3.1 | 20 | 4 | 50 | — | Standard |
| DC836-3100-04-01 | Black-coated solid carbide drill (X) | 3.1 | 18 | 4 | 50 | — | Standard |
| DC836-3100-04-02 | Black-coated solid carbide drill | 3.1 | 20 | 4 | 50 | — | Standard |
| DC836-3100-04-03 | Black-coated solid carbide drill | 3.1 | 7 | 4 | 38 | — | Standard |
| DC836-3100-04-05 | Black-coated solid carbide drill | 3.1 | 7 | 4 | 50 | — | Standard |
| DC836-3110-03-01 | Bronze-coated solid carbide drill | 3.11 | 20 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.