For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-3940-03-01 | Bronze-coated solid carbide drill | 3.94 | 20 | 4 | 50 | — | Standard |
| DC836-3950-03-02Repeat order | Bronze-coated solid carbide drill | 3.95 | 20 | 4 | 50 | — | Standard |
| DC836-3950-03-04 | Bronze-coated solid carbide drill | 3.95 | 40 | 4 | 60 | 90° | Standard |
| DC836-3950-03-05 | Bronze-coated solid carbide drill | 3.95 | 63 | 4 | 80 | 130° | Standard |
| DC836-3960-03-01 | Bronze-coated solid carbide drill | 3.96 | 20 | 4 | 50 | — | Standard |
| DC836-3970-03-01 | Bronze-coated solid carbide drill | 3.97 | 20 | 4 | 50 | — | Standard |
| DC836-3980-03-01 | Bronze-coated solid carbide drill | 3.98 | 20 | 4 | 50 | — | Standard |
| DC836-3990-02 | Bronze-coated solid carbide drill | 3.99 | — | — | — | 90° | View full callout |
| DC836-3990-03-01 | Bronze-coated solid carbide drill | 3.99 | 20 | 4 | 50 | — | Standard |
| DC836-4000-03-05Repeat order | Bronze-coated solid carbide drill | 4 | 20 | 4 | 50 | — | Standard |
| DC836-4000-03-06 | Bronze-coated solid carbide drill | 4 | 35 | 4 | 75 | 140° | Standard |
| DC836-4000-03-08 | Bronze-coated solid carbide drill | 4 | 34 | 6 | 74 | — | Standard |
| DC836-4000-03-09 | Bronze-coated solid carbide drill | 4 | 20 | 6 | 80 | — | Standard |
| DC836-4000-03-11 | Bronze-coated solid carbide drill | 4 | 28 | 4 | 55 | — | Standard |
| DC836-4000-03-12 | Bronze-coated solid carbide drill | 4 | 24 | 4 | 66 | — | Standard |
| DC836-4010 | Black-coated solid carbide drill | 4.01 | 15 | 6 | 45 | 140° | Standard |
| DC836-4050-02-01 | Black-coated solid carbide drill | 4.05 | 16 | 6 | 50 | — | Standard |
| DC836-4050-02-02 | Black-coated solid carbide drill | 4.05 | 25 | 5 | 50 | — | Standard |
| DC836-4050-03-02 | Bronze-coated solid carbide drill | 4.05 | 24 | 6 | 65 | — | Standard |
| DC836-4050-03-03 | Bronze-coated solid carbide drill | 4.05 | 63 | 6 | 80 | 130° | Standard |
| DC836-4050-03-04 | Bronze-coated solid carbide drill | 4.05 | 22 | 5 | 50 | — | Standard |
| DC836-4050-03-05 | Bronze-coated solid carbide drill | 4.05 | 24 | 6 | 66 | — | Standard |
| DC836-4100-03-01 | Bronze-coated solid carbide drill | 4.1 | 20 | 6 | 50 | — | Standard |
| DC836-4100-04 | Black-coated solid carbide drill | 4.1 | 12 | 6 | 45 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.