For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-5230-04-01 | Black-coated solid carbide drill | 5.23 | 5 | 6 | 38 | — | Standard |
| DC836-5300-02-01 | Black-coated solid carbide drill | 5.3 | 12 | 6 | 50 | 118° | Standard |
| DC836-5300-03-01 | Bronze-coated solid carbide drill | 5.3 | 26 | 6 | 60 | — | Standard |
| DC836-5350-03-01 | Bronze-coated solid carbide drill | 5.35 | 26 | 6 | 60 | 140° | Standard |
| DC836-5400-03-01 | Bronze-coated solid carbide drill | 5.4 | 26 | 6 | 60 | — | Standard |
| DC836-5500-03-01 | Bronze-coated solid carbide drill | 5.5 | 26 | 6 | 60 | — | Standard |
| DC836-5500-04-01 | Black-coated solid carbide drill | 5.5 | 26 | 6 | 60 | — | Standard |
| DC836-5550-03-01 | Bronze-coated solid carbide drill | 5.55 | 25 | 6 | 50 | — | Standard |
| DC836-5580-20-01 | Bronze-coated solid carbide drill | 5.58 | 25 | 6 | 60 | 118° | Standard |
| DC836-5600-03-01 | Bronze-coated solid carbide drill | 5.6 | 26 | 6 | 60 | — | Standard |
| DC836-5600-03-02 | Bronze-coated solid carbide drill | 5.6 | 28 | 6 | 66 | — | Standard |
| DC836-5650-06-01 | DLC-coated solid carbide drill | 5.65 | 15 | 6 | 50 | — | Standard |
| DC836-5700-03-01 | Bronze-coated solid carbide drill | 5.7 | 26 | 6 | 60 | — | Standard |
| DC836-5700-04-01 | Black-coated solid carbide drill | 5.7 | 26 | 6 | 60 | — | Standard |
| DC836-5700-04-02 | Black-coated solid carbide drill | 5.7 | 12 | 6 | 50 | — | Standard |
| DC836-5800-03-01 | Bronze-coated solid carbide drill | 5.8 | 26 | 6 | 60 | — | Standard |
| DC836-5850-03-01 | Bronze-coated solid carbide drill | 5.85 | 25 | 6 | 60 | — | Standard |
| DC836-5900-03-01 | Bronze-coated solid carbide drill | 5.9 | 26 | 6 | 60 | — | Standard |
| DC836-6000-03-02 | Bronze-coated solid carbide drill | 6 | 26 | 6 | 60 | — | Standard |
| DC836-6000-03-03 | Bronze-coated solid carbide drill | 6 | 30 | 6 | 60 | — | Standard |
| DC836-6000-04-05 | Black-coated solid carbide drill | 6 | 20 | 6 | 50 | — | Standard |
| DC836-6000-04-06 | Black-coated solid carbide drill | 6 | 25 | 6 | 50 | 118° | Standard |
| DC836-6030-03-02 | Bronze-coated solid carbide drill | 6.03 | 55 | 8 | 80 | 90° | Standard |
| DC836-6050-03-01 | Bronze-coated solid carbide drill | 6.05 | 30 | 8 | 60 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.