For process engineers
The table is a production record, not a sales range.
EC426 — Bronze-coated flat-bottom solid carbide end mill
A real production series with 145 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 145
- Diameter span
- 0.05–12.7 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Typical application
Flat-bottom milling and pocket finishing.
Part numbers in EC426
145 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC426-1000-04-13 | Coated flat-bottom solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC426-1000-04-14 | Black-coated flat-bottom solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC426-1000-04-15 | Black-coated solid carbide end mill | 1 | — | — | — | — | View full callout |
| EC426-10000-06-01 | DLC-coated solid carbide end mill | 10 | — | — | — | — | View full callout |
| EC426-1100-03-01 | Bronze-coated flat-bottom solid carbide end mill | 1.1 | — | — | — | — | View full callout |
| EC426-12000-04-01 | Black-coated flat-bottom solid carbide end mill | 12 | — | — | — | — | View full callout |
| EC426-12700-03-01 | Bronze-coated solid carbide end mill | 12.7 | — | — | — | — | View full callout |
| EC426-1430-04 | Black-coated flat-bottom solid carbide end mill | 1.43 | — | — | — | — | View full callout |
| EC426-1500-02-02 | Black-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC426-1500-02-03 | Black-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC426-1500-03 | Bronze-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC426-1500-03-05 | Bronze-coated flat-bottom solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC426-1500-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 1.5 | — | — | — | — | View full callout |
| EC426-1700-03 | Bronze-coated flat-bottom solid carbide end mill | 1.7 | — | — | — | — | View full callout |
| EC426-1720-03 | Bronze-coated flat-bottom solid carbide end mill | 1.72 | — | — | — | — | View full callout |
| EC426-1740-04 | Black-coated flat-bottom solid carbide end mill | 1.74 | — | — | — | — | View full callout |
| EC426-1980-03 | Bronze-coated flat-bottom solid carbide end mill | 1.98 | — | — | — | — | View full callout |
| EC426-1980-03-01 | Bronze-coated flat-bottom solid carbide end mill | 1.98 | — | — | — | — | View full callout |
| EC426-2000-02-01 | Black-coated flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-02-03 | Black-coated flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-03-02 | Bronze-coated flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-03-03 | Bronze-coated flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-03-05 | Coated flat-bottom solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-03-06 | Coated flat-bottom solid carbide end mill | 2 | 8 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.