For process engineers
The table is a production record, not a sales range.
EC426 — Bronze-coated flat-bottom solid carbide end mill
A real production series with 145 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 145
- Diameter span
- 0.05–12.7 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Typical application
Flat-bottom milling and pocket finishing.
Part numbers in EC426
145 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC426-2000-06-01 | DLC-coated solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2000-06-02 | DLC-coated flat-bottom for aluminium solid carbide end mill | 2 | — | — | — | — | View full callout |
| EC426-2100-04-01 | Black-coated flat-bottom solid carbide end mill | 2.1 | — | — | — | — | View full callout |
| EC426-2400-02-01 | Black-coated flat-bottom solid carbide end mill | 2.4 | — | — | — | — | View full callout |
| EC426-2500-03-04 | Bronze-coated flat-bottom solid carbide end mill | 2.5 | — | — | — | — | View full callout |
| EC426-2800-03 | Bronze-coated flat-bottom solid carbide end mill | 2.8 | — | — | — | — | View full callout |
| EC426-3000-02-02 | Black-coated flat-bottom solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC426-3000-02-03 | Black-coated flat-bottom solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC426-3000-02-04 | Black-coated flat-bottom solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC426-3000-03-03 | Bronze-coated flat-bottom solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC426-3000-03-04 | Bronze-coated flat-bottom solid carbide end mill | 3 | — | — | — | — | View full callout |
| EC426-3500-04-01 | Black-coated flat-bottom solid carbide end mill | 3.5 | — | — | — | — | View full callout |
| EC426-4000-02-01 | Black-coated flat-bottom solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC426-4000-02-04 | Black-coated flat-bottom solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC426-4000-03-02 | Bronze-coated flat-bottom solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC426-4000-03-03 | Bronze-coated flat-bottom solid carbide end mill | 4 | — | — | — | — | View full callout |
| EC426-5000-06-03 | DLC-coated solid carbide end mill | 5 | — | — | — | — | View full callout |
| EC426-5000-06-07 | DLC-coated solid carbide end mill | 5 | — | — | — | — | View full callout |
| EC426-6000-02-01 | Black-coated flat-bottom solid carbide end mill | 6 | — | — | — | — | View full callout |
| EC426-6000-03 | Bronze-coated flat-bottom solid carbide end mill | 6 | — | — | — | — | View full callout |
| EC426-6000-06-03 | DLC-coated solid carbide end mill | 6 | — | — | — | — | View full callout |
| EC426-8000-06-01 | DLC-coated solid carbide end mill | 8 | — | — | — | — | View full callout |
| EC426-8000-06-02 | DLC-coated solid carbide end mill | 8 | — | — | — | — | View full callout |
| EC426-8000-06-05 | DLC-coated solid carbide end mill | 8 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.