For process engineers
The table is a production record, not a sales range.
EC426 — Bronze-coated flat-bottom solid carbide end mill
A real production series with 145 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 145
- Diameter span
- 0.05–12.7 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Typical application
Flat-bottom milling and pocket finishing.
Part numbers in EC426
145 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| EC426-0050-02-02 | Bronze-coated solid carbide end mill | 0.05 | — | — | — | — | View full callout |
| EC426-0050-03-01 | Bronze-coated solid carbide end mill | 0.05 | — | — | — | — | View full callout |
| EC426-0100-02 | Black-coated solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC426-0100-03 | Black-coated flat-bottom solid carbide end mill | 0.1 | — | — | — | — | View full callout |
| EC426-0150-03Repeat order | Bronze-coated flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC426-0150-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.15 | — | — | — | — | View full callout |
| EC426-0180-03-01Repeat order | Bronze-coated flat-bottom solid carbide end mill | 0.18 | — | — | — | — | View full callout |
| EC426-0190-03-01 | Bronze-coated flat-bottom solid carbide end mill | 0.19 | — | — | — | — | View full callout |
| EC426-0200-03Repeat order | Bronze-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC426-0200-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC426-0200-03-03 | Bronze-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC426-0200-03-05 | Bronze-coated flat-bottom solid carbide end mill | 0.2 | 0.4 | 4 | 50 | — | Standard |
| EC426-0200-04-01 | Black-coated flat-bottom solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC426-0200-06-01 | DLC-coated flat-bottom for aluminium solid carbide end mill | 0.2 | — | — | — | — | View full callout |
| EC426-0230-03-01 | Bronze-coated flat-bottom solid carbide end mill | 0.23 | — | — | — | — | View full callout |
| EC426-0230-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.23 | — | — | — | — | View full callout |
| EC426-0250-03-01 | Bronze-coated flat-bottom solid carbide end mill | 0.25 | — | — | — | — | View full callout |
| EC426-0270-03-01 | Bronze-coated flat-bottom solid carbide end mill | 0.27 | — | — | — | — | View full callout |
| EC426-0270-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.27 | — | — | — | — | View full callout |
| EC426-0270-03-03 | Bronze-coated flat-bottom solid carbide end mill | 0.27 | — | — | — | — | View full callout |
| EC426-0300-03 | Bronze-coated flat-bottom solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC426-0300-03-02 | Bronze-coated flat-bottom solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC426-0300-03-03 | Bronze-coated flat-bottom solid carbide end mill | 0.3 | — | — | — | — | View full callout |
| EC426-0300-03-05 | Bronze-coated flat-bottom solid carbide end mill | 0.3 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.