For process engineers
The table is a production record, not a sales range.
HDC326 — Solid carbide drill (not for shrink-fit holders)
A real production series with 507 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 507
- Diameter span
- 0.03–4.1 mm
- Coating
- Uncoated
Part numbers in HDC326
507 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC326-0270-13 | Solid carbide drill (not for shrink-fit holders) | 0.27 | 2.3 | 3 | 38 | 118° | Standard |
| HDC326-0275-02 | Solid carbide drill (not for shrink-fit holders) | 0.275 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0280-04 | Solid carbide drill (not for shrink-fit holders) | 0.28 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0280-05 | Solid carbide drill (not for shrink-fit holders) | 0.28 | 4.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0280-10 | Solid carbide drill (not for shrink-fit holders) | 0.28 | — | — | — | 110° | View full callout |
| HDC326-0280-11 | Solid carbide drill (not for shrink-fit holders) | 0.28 | — | — | — | 100° | View full callout |
| HDC326-0280-13 | Solid carbide drill (not for shrink-fit holders) | 0.28 | 4 | 3.175 | 38 | 160° | Standard |
| HDC326-0280-14 | Solid carbide drill (not for shrink-fit holders) | 0.28 | 4 | 3 | 38 | 118° | Standard |
| HDC326-0285-01 | Solid carbide drill (not for shrink-fit holders) | 0.285 | 4 | 3.175 | 38 | 110° | Standard |
| HDC326-0285-03 | Solid carbide drill (not for shrink-fit holders) | 0.285 | 4 | 3 | 38 | 118° | Standard |
| HDC326-0290-03 | Solid carbide drill (not for shrink-fit holders) | 0.29 | 5.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0295-03 | Solid carbide drill (not for shrink-fit holders) | 0.295 | 4 | 3 | 38 | 118° | Standard |
| HDC326-0300-01 | Solid carbide drill (not for shrink-fit holders) | 0.3 | 2.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0300-04 | Solid carbide drill (not for shrink-fit holders) | 0.3 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0300-06 | Solid carbide drill (not for shrink-fit holders) | 0.3 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0300-08Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.3 | 5.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0300-15 | Solid carbide drill (not for shrink-fit holders) | 0.3 | — | — | — | 38° | View full callout |
| HDC326-0310-01 | Solid carbide drill (not for shrink-fit holders) | 0.31 | 2.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0310-02 | Solid carbide drill (not for shrink-fit holders) | 0.31 | 4.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0310-03 | Solid carbide drill (not for shrink-fit holders) | 0.31 | 5.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0310-07 | Solid carbide drill (not for shrink-fit holders) | 0.31 | — | — | — | 118° | View full callout |
| HDC326-0315-02 | Solid carbide drill (not for shrink-fit holders) | 0.315 | 6.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0320-04 | Solid carbide drill (not for shrink-fit holders) | 0.32 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0320-07 | Solid carbide drill (not for shrink-fit holders) | 0.32 | 5.5 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.