For process engineers
The table is a production record, not a sales range.
HDC326 — Solid carbide drill (not for shrink-fit holders)
A real production series with 507 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 507
- Diameter span
- 0.03–4.1 mm
- Coating
- Uncoated
Part numbers in HDC326
507 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC326-0370-06 | Solid carbide drill (not for shrink-fit holders) | 0.37 | 6 | 3.175 | 38 | 130° | Standard |
| HDC326-0380-03 | Solid carbide drill (not for shrink-fit holders) | 0.38 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0380-10 | Solid carbide drill (not for shrink-fit holders) | 0.38 | 1 | 3.175 | 38 | 118° | Standard |
| HDC326-0390-02 | Solid carbide drill (not for shrink-fit holders) | 0.39 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0390-05 | Solid carbide drill (not for shrink-fit holders) | 0.39 | — | — | — | 118° | View full callout |
| HDC326-0395-04 | Solid carbide drill (not for shrink-fit holders) | 0.395 | — | — | — | 118° | View full callout |
| HDC326-0400-03 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 3.5 | 3 | 38 | 118° | Standard |
| HDC326-0400-04 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 3.8 | 3.175 | 38 | 118° | Standard |
| HDC326-0400-05 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0400-08 | Solid carbide drill (not for shrink-fit holders) | 0.4 | — | — | — | — | View full callout |
| HDC326-0400-09 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0400-10 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 11 | 3.175 | 38 | 118° | Standard |
| HDC326-0400-11Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.4 | — | — | — | 118° | View full callout |
| HDC326-0400-14 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 4.5 | 3 | 38 | 118° | Standard |
| HDC326-0400-18 | Solid carbide drill (not for shrink-fit holders) | 0.4 | — | — | — | 118° | View full callout |
| HDC326-0400-21 | Solid carbide drill (not for shrink-fit holders) | 0.4 | 7.5 | 3.175 | 38 | 130° | Standard |
| HDC326-0410-01 | Solid carbide drill (not for shrink-fit holders) | 0.41 | 3.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0410-08 | Solid carbide drill (not for shrink-fit holders) | 0.41 | — | — | — | 118° | View full callout |
| HDC326-0410-10 | Solid carbide drill (not for shrink-fit holders) | 0.41 | 5 | 3.175 | 38 | 130° | Standard |
| HDC326-0420Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.42 | — | — | — | 118° | View full callout |
| HDC326-0420-04 | Solid carbide drill (not for shrink-fit holders) | 0.42 | 10.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0420-05 | Solid carbide drill (not for shrink-fit holders) | 0.42 | 3 | 3.175 | 38 | 118° | Standard |
| HDC326-0420-06 | Solid carbide drill (not for shrink-fit holders) | 0.42 | 5 | 3 | 38 | 118° | Standard |
| HDC326-0425 | Solid carbide drill (not for shrink-fit holders) | 0.425 | 4 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.