For process engineers
The table is a production record, not a sales range.
HDC326 — Solid carbide drill (not for shrink-fit holders)
A real production series with 507 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 507
- Diameter span
- 0.03–4.1 mm
- Coating
- Uncoated
Part numbers in HDC326
507 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| HDC326-0320-14 | Solid carbide drill (not for shrink-fit holders) | 0.32 | — | — | — | 118° | View full callout |
| HDC326-0320-15 | Solid carbide drill | 0.32 | — | — | — | 90° | View full callout |
| HDC326-0325-03 | Solid carbide drill (not for shrink-fit holders) | 0.325 | 5.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0325-04 | Solid carbide drill (not for shrink-fit holders) | 0.325 | 6.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0325-05 | Solid carbide drill (not for shrink-fit holders) | 0.325 | — | — | — | 118° | View full callout |
| HDC326-0328-02Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.328 | 6.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0330-03 | Solid carbide drill (not for shrink-fit holders) | 0.33 | 5.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0330-04 | Solid carbide drill (not for shrink-fit holders) | 0.33 | 6.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0335-01 | Solid carbide drill (not for shrink-fit holders) | 0.335 | 5 | 3 | 38 | 118° | Standard |
| HDC326-0340-02 | Solid carbide drill (not for shrink-fit holders) | 0.34 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0345-02 | Solid carbide drill (not for shrink-fit holders) | 0.345 | — | — | — | 118° | View full callout |
| HDC326-0350-06 | Solid carbide drill (not for shrink-fit holders) | 0.35 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0350-08Repeat order | Solid carbide drill (not for shrink-fit holders) | 0.35 | 6.5 | 3.175 | 38 | 118° | Standard |
| HDC326-0350-13 | Solid carbide drill (not for shrink-fit holders) | 0.35 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0350-14 | Solid carbide drill (not for shrink-fit holders) | 0.35 | 5 | 3 | 38 | 118° | Standard |
| HDC326-0350-15 | Solid carbide drill (not for shrink-fit holders) | 0.35 | 6 | 3.175 | 38 | 130° | Standard |
| HDC326-0355-01 | Solid carbide drill (not for shrink-fit holders) | 0.355 | — | — | — | 118° | View full callout |
| HDC326-0360-03 | Solid carbide drill (not for shrink-fit holders) | 0.36 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0360-04 | Solid carbide drill (not for shrink-fit holders) | 0.36 | 6.5 | 3.175 | 38 | 130° | Standard |
| HDC326-0360-08 | Solid carbide drill (not for shrink-fit holders) | 0.36 | 5 | 3.175 | 38 | 118° | Standard |
| HDC326-0365-01 | Solid carbide drill (not for shrink-fit holders) | 0.365 | 4 | 3.175 | 38 | 118° | Standard |
| HDC326-0365-04 | Solid carbide drill (not for shrink-fit holders) | 0.365 | — | — | — | 118° | View full callout |
| HDC326-0368-01 | Solid carbide drill (not for shrink-fit holders) | 0.368 | 6.8 | 3.175 | 38 | 118° | Standard |
| HDC326-0370-02 | Solid carbide drill (not for shrink-fit holders) | 0.37 | 4 | 3.175 | 38 | 118° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.