ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series DG

DG — Solid carbide cutting tool

11 catalogue part numbers, measured diameters from 5 to 5 mm, primary coating uncoated.

Diameter range5–5mm
CoatinguncoatedPrimary coating
Part numbers11on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeDG
DescriptionSolid carbide cutting tool
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter5–5 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record11

02Part number matrix

11 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
DG-001Solid carbide cutting tool—————uncoatedKTP28L-08
DG-002Solid carbide cutting tool—————uncoatedKTGFR1212F-16F
DG-003Solid carbide cutting tool—————uncoatedSVJ2BR-0808K-11
DG-004Solid carbide cutting tool—————uncoatedCSVR-0808L-1102
DG-005Solid carbide cutting tool—————uncoatedKTGFR1616M-16F
DG-008Solid carbide cutting tool—————uncoatedSVJCR0808K11
DG-009Solid carbide cutting tool—————uncoatedDSACR1616H11
DG-010Solid carbide cutting tool—————uncoatedKTKFR1616K-12
DG-011Solid carbide cutting tool—————uncoatedKTGFR1616K-16
DG-012Solid carbide cutting tool—————uncoatedKTP26LA25-08
DG-013Solid carbide saw blade5————uncoatedD5*D6*50

Showing 11 of 11 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
11 part numbers
In DG
Geometry callouts in this series
  • KTP28L-08 · DG-001
  • KTGFR1212F-16F · DG-002
  • SVJ2BR-0808K-11 · DG-003
  • CSVR-0808L-1102 · DG-004

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 5–5 mm for DG. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 11 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

DG is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series