ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series FCS626

FCS626 — Left-hand step solid carbide drill

10 catalogue part numbers, measured diameters from 0.89 to 9.28 mm, primary coating uncoated.

Diameter range0.89–9.28mm
CoatinguncoatedPrimary coating
Part numbers10on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeFCS626
DescriptionLeft-hand step solid carbide drill
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.89–9.28 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record10

02Part number matrix

10 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
FCS626-001Left-hand step solid carbide drill4.93————uncoatedD4.93*5+4.032*3.24+3.0*1.0
FCS626-002Left-hand step solid carbide drill6.8———118.0°uncoatedD6.80*9.6*118°+8.9*1.5*60°*6*50
FCS626-003Left-hand step solid carbide drill6.86———118.0°uncoatedD6.86*9.6*118°+8.9*5.2*60°*6*50
FCS626-004Left-hand step solid carbide drill6.96———118.0°uncoatedD6.96*9*118°+8.9*5.2*60°*6*50
FCS626-025Left-hand step solid carbide drill1.28———118.0°uncoatedD1.285*2.4*118°+1.64*62°+2.56*1.93(R0.1)+3.4*5*(C0.4)*4*50(2246)
FCS626-029Left-hand step solid carbide drill0.89———120.0°uncoatedD0.885*1.3*120°+1.145*8*80°*3*38
FCS626-038Left-hand step solid carbide drill1.3———135.0°uncoatedD1.305*3.89*135°+2.0*67.4°*2*38
FCS626-039Left-hand step solid carbide drill9.28———118.0°uncoatedD9.28*13*118°+14.0*8.9*(C0.25)+17*5*(C1.5)*8*70
FCS626-040Left-hand step solid carbide drill9.28———118.0°uncoatedD9.28*13*118°+14.0*8.7*(C0.25)+17*5*(C1.5)*8*70
FCS626-041Left-hand step solid carbide drill9.27———118.0°uncoatedD9.27*13*118°+14.0*8.6*(C0.25)+17*5*(C1.5)*8*70

Showing 10 of 10 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
10 part numbers
In FCS626
Geometry callouts in this series
  • D4.93*5+4.032*3.24+3.0*1.0 · FCS626-001
  • D6.80*9.6*118°+8.9*1.5*60°*6*50 · FCS626-002
  • D6.86*9.6*118°+8.9*5.2*60°*6*50 · FCS626-003
  • D6.96*9*118°+8.9*5.2*60°*6*50 · FCS626-004

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.89–9.28 mm for FCS626. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 10 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

FCS626 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series