ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series DC926

DC926 — Coolant-through solid carbide drill

6 catalogue part numbers, measured diameters from 1.65 to 9 mm, primary coating uncoated.

Diameter range1.65–9mm
CoatinguncoatedPrimary coating
Part numbers6on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeDC926
DescriptionCoolant-through solid carbide drill
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter1.65–9 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record6

02Part number matrix

6 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
DC926-3500Coolant-through solid carbide drill3.540675—uncoated3.5*40*6*75
DC926-5600Coolant-through solid carbide drill5.655690—uncoatedD5.60*55*6*90
DC926-1650Coolant-through solid carbide drill1.6510350—uncoatedD1.65*10*3*50
DC926-2160Coolant-through solid carbide drill2.1610350—uncoatedD2.16*10*3*50
DC926-5000Coolant-through solid carbide drill555690—uncoatedD5.00*55*6*90
DC926-9000Coolant-through solid carbide drill9471089—uncoatedD9.0*47*10*89

Showing 6 of 6 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
6 part numbers
In DC926
Geometry callouts in this series
  • 3.5*40*6*75 · DC926-3500
  • D5.60*55*6*90 · DC926-5600
  • D1.65*10*3*50 · DC926-1650
  • D2.16*10*3*50 · DC926-2160

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 1.65–9 mm for DC926. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 6 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

DC926 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series