ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
End mills and routers · series EC626

EC626 — Left-hand solid carbide end mill

5 catalogue part numbers, measured diameters from 0.5 to 1.8 mm, primary coating uncoated.

Diameter range0.5–1.8mm
CoatinguncoatedPrimary coating
Part numbers5on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeEC626
DescriptionLeft-hand solid carbide end mill
Tooling familyEnd mills and routers
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.5–1.8 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record5

02Part number matrix

5 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
EC626-1600-01Left-hand solid carbide end mill1.6103.1738—uncoated1.60*10*3.175*38
EC626-0500-01Left-hand for aluminium solid carbide end mill0.5————uncoatedD0.50*2.4*4*50*2F
EC626-1000Left-hand solid carbide end mill1————uncoatedD1.00*2.0*3.175*38*1F
EC626-1800-01Left-hand solid carbide end mill1.8103.1738—uncoated1.80*10*3.175*38
EC626-0500-03Left-hand for aluminium solid carbide end mill0.5————uncoatedD0.50*1.5*4*50*3F

Showing 5 of 5 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
5 part numbers
In EC626
Geometry callouts in this series
  • 1.60*10*3.175*38 · EC626-1600-01
  • D0.50*2.4*4*50*2F · EC626-0500-01
  • D1.00*2.0*3.175*38*1F · EC626-1000
  • 1.80*10*3.175*38 · EC626-1800-01

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.5–1.8 mm for EC626. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 5 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

EC626 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

End mills and routers

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series