ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
End mills and routers · series RC426

RC426 — Black-coated solid carbide end mill

15 catalogue part numbers, measured diameters from 0.35 to 13 mm, primary coating black.

Diameter range0.35–13mm
CoatingblackPrimary coating
Part numbers15on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeRC426
DescriptionBlack-coated solid carbide end mill
Tooling familyEnd mills and routers
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.35–13 mm
Primary coatingblack
Application—
Catalogue page—
Part numbers on record15

02Part number matrix

15 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
RC426-6000-02-02Black-coated solid carbide end mill6————blackD6.00*10*6*50*R0.1*4F
RC426-0800-04-01Black-coated solid carbide end mill0.8————blackD0.80*1*4*50*R0.1*2F
RC426-0800-04-02Black-coated solid carbide end mill0.8————blackD0.80*0.8*4*50*R0.2*2F
RC426-0500-04-01Black-coated solid carbide end mill0.5————blackD0.50*1*4*50*R0.1*2F
RC426-0470-04Black-coated solid carbide end mill0.47————black0.47*0.8*3*38*R0.05*3F
RC426-0350-04Black-coated solid carbide end mill0.35————black0.35*0.8*3*38*R0.05*3F
RC426-4000-03Bronze-coated solid carbide end mill4————bronzeD4.00*4+3.9*6*4*50*4F
RC426-4000-03-01Bronze-coated solid carbide end mill4————bronzeD4.00*4+3.9*6*4*50*3F
RC426-1900-03-01Bronze-coated solid carbide end mill1.9————bronzeD1.90*6*6*65*R0.7*4F
RC426-0600-04Black-coated solid carbide end mill0.6————blackD0.60*1+1.70*6(避空)+3.0*6(避空)*4*50*2F
RC426-2000-04Black-coated solid carbide end mill2————blackD2.0*R0.5*4*4*50*4F
RC426-2500-04Black-coated solid carbide end mill2.5————blackD2.5*R0.5*5*4*50*4F
RC426-13000-03-01Bronze-coated solid carbide end mill13————bronzeD13.00*25*14*65*4F*R0.2
RC426-1000-03-01Coated solid carbide end mill1————coatedD1.0*R0.1*3*4*50*4F
RC426-2000Coated solid carbide end mill2————coated2R0.2*5*4D*50L*4T

Showing 15 of 15 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

3 coatings on record
black
9 part numbers
In RC426
bronze
4 part numbers
In RC426
coated
2 part numbers
In RC426
Geometry callouts in this series
  • D6.00*10*6*50*R0.1*4F · RC426-6000-02-02
  • D0.80*1*4*50*R0.1*2F · RC426-0800-04-01
  • D0.80*0.8*4*50*R0.2*2F · RC426-0800-04-02
  • D0.50*1*4*50*R0.1*2F · RC426-0500-04-01

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.35–13 mm for RC426. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is black. Across the 15 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

RC426 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

End mills and routers

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series