For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-11600-03-01 | Bronze-coated solid carbide drill | 11.6 | 45 | 12 | 75 | — | Standard |
| DC836-1180-04-02 | Black-coated solid carbide drill (YZ variant) | 1.18 | 6 | 4 | 50 | 140° | Standard |
| DC836-1190-04-04 | Black-coated solid carbide drill | 1.19 | 5.1 | 4 | 75 | — | Standard |
| DC836-1200-01 | Coated solid carbide drill | 1.2 | 3 | 4 | 50 | 135° | Standard |
| DC836-1200-03-01 | Bronze-coated solid carbide drill | 1.2 | 8 | 4 | 50 | — | Standard |
| DC836-1200-03-03Repeat order | Bronze-coated solid carbide drill | 1.2 | 12 | 4 | 50 | — | Standard |
| DC836-1200-03-04 | Bronze-coated solid carbide drill | 1.2 | 7 | 4 | 50 | — | Standard |
| DC836-1200-03-05Repeat order | Bronze-coated solid carbide drill | 1.2 | 15 | 4 | 50 | 140° | Standard |
| DC836-1200-03-09 | Bronze-coated solid carbide drill | 1.2 | 13 | 4 | 50 | 140° | Standard |
| DC836-1200-03-10 | Bronze-coated solid carbide drill | 1.2 | 10 | 4 | 75 | 130° | Standard |
| DC836-1200-03-12 | Bronze-coated solid carbide drill (YZ variant) | 1.2 | 10 | 4 | 50 | — | Standard |
| DC836-1200-04-04 | Black-coated solid carbide drill | 1.2 | 7 | 4 | 50 | — | Standard |
| DC836-1200-04-06 | Black-coated solid carbide drill | 1.2 | — | — | — | — | View full callout |
| DC836-1200-04-07 | Black-coated solid carbide drill | 1.2 | 10 | 4 | 50 | — | Standard |
| DC836-1200-04-08 | Black-coated solid carbide drill | 1.2 | 3 | 4 | 50 | 140° | Standard |
| DC836-12000-03-01 | Bronze-coated solid carbide drill | 12 | 45 | 12 | 75 | — | Standard |
| DC836-1210-02-01 | Black-coated solid carbide drill | 1.21 | 4 | 4 | 50 | 140° | Standard |
| DC836-1220-20-01 | Bronze-coated solid carbide drill | 1.22 | — | — | — | 135° | View full callout |
| DC836-1230-03-01 | Bronze-coated solid carbide drill | 1.23 | 8 | 4 | 50 | — | Standard |
| DC836-1230-15-01 | Black-coated solid carbide drill | 1.23 | 8 | 4 | 50 | 135° | Standard |
| DC836-1250-02-02 | Black-coated solid carbide drill | 1.25 | 6 | 4 | 50 | 118° | Standard |
| DC836-1250-03-01Repeat order | Bronze-coated solid carbide drill | 1.25 | 12 | 4 | 50 | — | Standard |
| DC836-1250-03-02 | Bronze-coated solid carbide drill | 1.25 | 6 | 4 | 50 | 118° | Standard |
| DC836-1250-04-01 | Black-coated solid carbide drill | 1.25 | 5 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.