For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-10600-03-01 | Bronze-coated solid carbide drill | 10.6 | 42 | 12 | 75 | — | Standard |
| DC836-1070-01-01 | TiN-coated solid carbide drill | 1.07 | 4 | 4 | 50 | 118° | Standard |
| DC836-1075-04-01 | Black-coated solid carbide drill | 1.075 | 7 | 4 | 50 | 120° | Standard |
| DC836-1080-02-02 | Black-coated solid carbide drill | 1.08 | — | — | — | — | View full callout |
| DC836-1080-02-03 | Black-coated solid carbide drill | 1.08 | 5.5 | 4 | 45 | 130° | Standard |
| DC836-1080-03-01 | Bronze-coated solid carbide drill | 1.08 | — | — | — | — | View full callout |
| DC836-1080-04-01 | Black-coated solid carbide drill | 1.08 | 4 | 4 | 50 | — | Standard |
| DC836-1080-06 | DLC-coated solid carbide drill | 1.08 | — | — | — | 160° | View full callout |
| DC836-1085-02-01 | Black-coated solid carbide drill | 1.085 | 5 | 4 | 50 | 140° | Standard |
| DC836-1085-03-02 | Bronze-coated solid carbide drill | 1.085 | 5 | 4 | 50 | 140° | Standard |
| DC836-1090-02-02 | Black-coated solid carbide drill | 1.09 | — | — | — | 158° | View full callout |
| DC836-1090-02-03 | Black-coated solid carbide drill | 1.09 | — | — | — | 135° | View full callout |
| DC836-1090-02-05Repeat order | Black-coated solid carbide drill | 1.09 | — | — | — | 140° | View full callout |
| DC836-1090-02-06 | Black-coated solid carbide drill | 1.09 | 5 | 4 | 75 | 118° | Standard |
| DC836-1090-02-07 | Black-coated solid carbide drill | 1.09 | 4 | 4 | 50 | 140° | Standard |
| DC836-1090-03-01 | Bronze-coated solid carbide drill | 1.09 | — | — | — | 140° | View full callout |
| DC836-1090-04-01Repeat order | Black-coated solid carbide drill | 1.09 | 5.5 | 4 | 45 | 130° | Standard |
| DC836-1090-04-04 | Black-coated solid carbide drill | 1.09 | 5 | 4 | 75 | 140° | Standard |
| DC836-1090-04-05 | Black-coated solid carbide drill | 1.09 | 7 | 4 | 50 | 118° | Standard |
| DC836-1090-04-06 | Black-coated solid carbide drill | 1.09 | 4 | 4 | 50 | 140° | Standard |
| DC836-1090-04-07 | Black-coated solid carbide drill | 1.09 | 5.5 | 4 | 45 | 130° | Standard |
| DC836-1090-04-08 | Black-coated solid carbide drill | 1.09 | — | — | — | 140° | View full callout |
| DC836-1090-20-02 | Bronze-coated solid carbide drill | 1.09 | — | — | — | 135° | View full callout |
| DC836-1090-27-01 | Coated solid carbide drill | 1.09 | — | — | — | — | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.