For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-1850-03-03 | Bronze-coated solid carbide drill | 1.85 | 16 | 4 | 50 | — | Standard |
| DC836-1850-03-05 | Bronze-coated solid carbide drill | 1.85 | 8 | 4 | 50 | 120° | Standard |
| DC836-1850-04-01 | Black-coated solid carbide drill | 1.85 | 8 | 4 | 50 | — | Standard |
| DC836-1900-02-02 | Black-coated solid carbide drill | 1.9 | 7 | 4 | 50 | 140° | Standard |
| DC836-1900-03-02 | Bronze-coated solid carbide drill | 1.9 | 11 | 4 | 50 | — | Standard |
| DC836-1900-03-03Repeat order | Bronze-coated solid carbide drill | 1.9 | 15 | 4 | 50 | — | Standard |
| DC836-1900-04-02 | Black-coated solid carbide drill | 1.9 | 11 | 4 | 50 | — | Standard |
| DC836-1900-04-06 | Black-coated solid carbide drill | 1.9 | 15 | 4 | 50 | — | Standard |
| DC836-1900-04-08 | Black-coated solid carbide drill | 1.9 | 8 | 4 | 40 | 118° | Standard |
| DC836-1905-02-02 | Black-coated solid carbide drill | 1.905 | 7 | 6 | 60 | — | Standard |
| DC836-1905-02-03 | Black-coated solid carbide drill | 1.905 | 14.5 | 6 | 60 | — | Standard |
| DC836-1940-04-02 | Black-coated solid carbide drill | 1.94 | — | — | — | 70° | View full callout |
| DC836-1940-04-03 | Black-coated solid carbide drill | 1.94 | 10 | 6 | 40 | 70° | Standard |
| DC836-1950-03 | Bronze-coated solid carbide drill | 1.95 | 25 | 4 | 60 | — | Standard |
| DC836-1950-03-01 | Bronze-coated solid carbide drill | 1.95 | 15 | 4 | 50 | — | Standard |
| DC836-1950-03-03 | Bronze-coated solid carbide drill | 1.95 | 5 | 4 | 50 | 118° | Standard |
| DC836-1950-03-05 | Bronze-coated solid carbide drill (YZ variant) | 1.95 | 15 | 4 | 50 | — | Standard |
| DC836-1970-02 | Black-coated solid carbide drill | 1.97 | 8 | 4 | 50 | 118° | Standard |
| DC836-1970-04-03 | Black-coated solid carbide drill | 1.97 | 10 | 4 | 50 | 118° | Standard |
| DC836-1980-03 | Bronze-coated solid carbide drill | 1.98 | 25 | 4 | 60 | — | Standard |
| DC836-2000-03-01 | Bronze-coated solid carbide drill | 2 | 18 | 4 | 50 | — | Standard |
| DC836-2000-03-02Repeat order | Bronze-coated solid carbide drill | 2 | 11 | 4 | 50 | — | Standard |
| DC836-2000-03-06 | Bronze-coated solid carbide drill | 2 | 20 | 4 | 50 | — | Standard |
| DC836-2000-03-07Repeat order | Bronze-coated solid carbide drill | 2 | 15 | 4 | 50 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.