For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-2000-03-12 | Bronze-coated solid carbide drill | 2 | 14 | 4 | 50 | — | Standard |
| DC836-2000-03-14 | Bronze-coated solid carbide drill | 2 | 15 | 4 | 75 | 140° | Standard |
| DC836-2000-03-15 | Bronze-coated solid carbide drill (A) | 2 | 11 | 4 | 50 | — | Standard |
| DC836-2000-03-16Repeat order | Bronze-coated solid carbide drill (A) | 2 | 15 | 4 | 50 | — | Standard |
| DC836-2000-03-17 | Bronze-coated solid carbide drill (A) | 2 | 20 | 4 | 50 | — | Standard |
| DC836-2000-04-05 | Black-coated solid carbide drill | 2 | 15 | 4 | 50 | — | Standard |
| DC836-2000-04-06 | Black-coated solid carbide drill | 2 | 15 | 4 | 55 | 140° | Standard |
| DC836-2000-04-11 | Black-coated solid carbide drill | 2 | 5 | 4 | 50 | — | Standard |
| DC836-2000-04-12 | Black-coated solid carbide drill | 2 | 8.5 | 4 | 50 | 140° | Standard |
| DC836-2000-04-14 | Black-coated solid carbide drill | 2 | — | — | — | 118° | View full callout |
| DC836-2000-04-15 | Black-coated solid carbide drill | 2 | — | — | — | 118° | View full callout |
| DC836-2000-04-16 | Black-coated solid carbide drill | 2 | 13 | 4 | 50 | — | Standard |
| DC836-2000-13-01 | Bronze-coated solid carbide drill | 2 | 6 | 4 | 50 | 118° | Standard |
| DC836-2010-13-01 | Bronze-coated solid carbide drill | 2.01 | 10 | 4 | 50 | — | Standard |
| DC836-2020-03 | Bronze-coated solid carbide drill | 2.02 | 5 | 4 | 50 | 118° | Standard |
| DC836-2020-13-01 | Bronze-coated solid carbide drill | 2.02 | 6 | 4 | 50 | 118° | Standard |
| DC836-2030-13 | Bronze-coated solid carbide drill | 2.03 | 6 | 4 | 50 | — | Standard |
| DC836-2050-03-01Repeat order | Bronze-coated solid carbide drill (YZ variant) | 2.05 | 15 | 4 | 50 | — | Standard |
| DC836-2050-03-03 | Bronze-coated solid carbide drill (A) | 2.05 | 15 | 4 | 50 | — | Standard |
| DC836-2050-03-04 | Bronze-coated solid carbide drill | 2.05 | 6 | 4 | 50 | — | Standard |
| DC836-2050-04-01 | Black-coated solid carbide drill | 2.05 | 8.5 | 4 | 40 | 140° | Standard |
| DC836-2060-02-01 | Black-coated solid carbide drill | 2.06 | 8 | 4 | 50 | 118° | Standard |
| DC836-2090-02 | Black-coated solid carbide drill | 2.09 | 5 | 4 | 50 | 118° | Standard |
| DC836-2100-02-02 | Black-coated solid carbide drill | 2.1 | 20 | 4 | 75 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.