For process engineers
The table is a production record, not a sales range.
DC836 — Bronze-coated solid carbide drill
A real production series with 928 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 928
- Diameter span
- 0.1–14 mm
- Coating
- Bronze
What the catalogue commits to
Production capability
Min. diameter 0.15 mm
Catalogue reference
2026–2027 product catalogue, printed page P42. The full EDP table is available on request as a PDF.
Typical application
Steel and stainless steel where coating wear resistance is needed.
Part numbers in DC836
928 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| DC836-1000-04-03 | Black-coated solid carbide drill | 1 | 9 | 4 | 60 | — | Standard |
| DC836-1000-04-04 | Black-coated solid carbide drill | 1 | 4 | 4 | 50 | 150° | Standard |
| DC836-1000-04-05 | Black-coated solid carbide drill | 1 | 6 | 4 | 50 | 150° | Standard |
| DC836-1000-04-06 | Black-coated solid carbide drill | 1 | 8 | 4 | 50 | 118° | Standard |
| DC836-1000-04-07Repeat order | Black-coated solid carbide drill | 1 | 4 | 4 | 50 | 130° | Standard |
| DC836-1000-06-01Repeat order | DLC-coated solid carbide drill | 1 | 10 | 4 | 75 | 118° | Standard |
| DC836-1000-08 | Coated solid carbide drill | 1 | 3 | 4 | 75 | 90° | Standard |
| DC836-1000-13-01 | Bronze-coated solid carbide drill | 1 | 5 | 4 | 50 | 140° | Standard |
| DC836-1000-13-02 | Bronze-coated solid carbide drill | 1 | 5 | 4 | 50 | 118° | Standard |
| DC836-1000-20-01 | Bronze-coated solid carbide drill | 1 | — | — | — | 140° | View full callout |
| DC836-10000-03-01 | Bronze-coated solid carbide drill | 10 | 40 | 10 | 75 | — | Standard |
| DC836-1010-03-01 | Bronze-coated solid carbide drill | 1.01 | 4 | 4 | 50 | — | Standard |
| DC836-1020-01 | Coated solid carbide drill | 1.02 | 3 | 4 | 50 | 135° | Standard |
| DC836-1025-06-01 | DLC-coated solid carbide drill | 1.025 | 10 | 4 | 50 | 118° | Standard |
| DC836-1030-03-01 | Bronze-coated solid carbide drill | 1.03 | 18 | 4 | 50 | 135° | Standard |
| DC836-1030-04-01 | Black-coated solid carbide drill | 1.03 | 2 | 4 | 50 | 140° | Standard |
| DC836-10300-03-01 | Bronze-coated solid carbide drill | 10.3 | 42 | 12 | 75 | — | Standard |
| DC836-10400-03-02 | Bronze-coated solid carbide drill | 10.4 | 55 | 12 | 102 | — | Standard |
| DC836-1050-01 | Coated solid carbide drill (YZ variant) | 1.05 | 4 | 4 | 50 | 118° | Standard |
| DC836-1050-03-02 | Bronze-coated solid carbide drill | 1.05 | 5 | 4 | 50 | — | Standard |
| DC836-1050-03-04 | Bronze-coated solid carbide drill | 1.05 | 10 | 4 | 70 | — | Standard |
| DC836-1050-04-01 | Black-coated solid carbide drill | 1.05 | 6 | 4 | 50 | — | Standard |
| DC836-1050-20 | Bronze-coated solid carbide drill | 1.05 | 2 | 4 | 35 | — | Standard |
| DC836-1055-04 | Black-coated solid carbide drill | 1.055 | — | — | — | 170° | View full callout |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.