ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series HDCC626

HDCC626 — Left-hand spotting solid carbide drill

5 catalogue part numbers, measured diameters from 1 to 3 mm, primary coating uncoated.

Diameter range1–3mm
CoatinguncoatedPrimary coating
Part numbers5on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeHDCC626
DescriptionLeft-hand spotting solid carbide drill
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter1–3 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record5

02Part number matrix

5 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
HDCC626-1200-01Left-hand spotting solid carbide drill1.22.5330140.0°uncoatedD1.20*2.5*3*30*140°
HDCC626-1600-08Left-hand spotting solid carbide drill1.62.5330105.0°uncoatedD1.60*2.5*3*30*105°
HDCC626-1300-05Left-hand spotting solid carbide drill1.32.53.23890.0°uncoatedD1.30*2.5*3.2*38*90°
HDCC626-3000-01-02Left-hand spotting solid carbide drill3433090.0°uncoatedD3.00*4*3*30*90°
HDCC626-1000Left-hand spotting solid carbide drill12.533090.0°uncoatedD1.00*2.5*3*30*90°

Showing 5 of 5 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
5 part numbers
In HDCC626
Geometry callouts in this series
  • D1.20*2.5*3*30*140° · HDCC626-1200-01
  • D1.60*2.5*3*30*105° · HDCC626-1600-08
  • D1.30*2.5*3.2*38*90° · HDCC626-1300-05
  • D3.00*4*3*30*90° · HDCC626-3000-01-02

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 1–3 mm for HDCC626. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 5 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

HDCC626 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series