ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series DC936L

DC936L — Bronze-coated coolant-through solid carbide drill

5 catalogue part numbers, measured diameters from 3 to 9.4 mm, primary coating bronze.

Diameter range3–9.4mm
CoatingbronzePrimary coating
Part numbers5on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeDC936L
DescriptionBronze-coated coolant-through solid carbide drill
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter3–9.4 mm
Primary coatingbronze
Application—
Catalogue page—
Part numbers on record5

02Part number matrix

5 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
DC936L-8800-03Bronze-coated coolant-through solid carbide drill8.86610103—bronzeD8.8*66*10*103
DC936L-9400-03Bronze-coated coolant-through solid carbide drill9.46610103—bronzeD9.4*66*10*103
DC936L-3100-04Black-coated coolant-through solid carbide drill3.128466—blackD3.10*28*4*66
DC936L-3900-06-01DLC-coated extended-length coolant-through solid carbide drill3.9754120—DLCD3.90*75*4*120
DC936L-3000-03-01Bronze-coated coolant-through solid carbide drill328466—bronzeD3.00*28*4*66

Showing 5 of 5 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

3 coatings on record
bronze
3 part numbers
In DC936L
black
1 part numbers
In DC936L
DLC
1 part numbers
In DC936L
Geometry callouts in this series
  • D8.8*66*10*103 · DC936L-8800-03
  • D9.4*66*10*103 · DC936L-9400-03
  • D3.10*28*4*66 · DC936L-3100-04
  • D3.90*75*4*120 · DC936L-3900-06-01

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 3–9.4 mm for DC936L. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is bronze. Across the 5 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

DC936L is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series