ISO 9001 CERTIFIED MANUFACTURER IN-HOUSE GRINDING · COATING · INSPECTION
Special and custom geometry · series HDCD326

HDCD326 — Solid carbide cutting tool (not for shrink-fit holders)

5 catalogue part numbers, measured diameters from 0.15 to 3.17 mm, primary coating uncoated.

Diameter range0.15–3.17mm
CoatinguncoatedPrimary coating
Part numbers5on record
Catalogue page—

01Series specification

From the catalogue series record
Series codeHDCD326
DescriptionSolid carbide cutting tool (not for shrink-fit holders)
Tooling familySpecial and custom geometry
Capability—
Tolerance—
Catalogue diameter range—
Measured diameter0.15–3.17 mm
Primary coatinguncoated
Application—
Catalogue page—
Part numbers on record5

02Part number matrix

5 records
Part numberDescriptionDiameter Flute (mm)Shank (mm)OAL (mm) PointCoatingGeometry
HDCD326-0500Solid carbide cutting tool (not for shrink-fit holders)0.523.173890.0°uncoatedD0.50*2*3.175*38*90°
HDCD326-0500-04Solid carbide cutting tool (not for shrink-fit holders)0.533.173890.0°uncoatedD0.50*3*3.175*38*90°
HDCD326-0150-01Solid carbide cutting tool (not for shrink-fit holders)0.1513.173890.0°uncoatedD0.15*1*3.175*38*90°
HDCD326-1000-04Solid carbide cutting tool (not for shrink-fit holders)133.173890.0°uncoatedD1.00*3*3.175*38*90°
HDCD326-3175-01Solid carbide cutting tool (not for shrink-fit holders)3.17———90.0°uncoatedD3.175*6+3(避空)*3.175*38*90°

Showing 5 of 5 part numbers in this series. Flute, shank and overall length are catalogue values; the geometry string is reproduced verbatim, including multi-diameter callouts.

03Coatings & geometry

1 coatings on record
uncoated
5 part numbers
In HDCD326
Geometry callouts in this series
  • D0.50*2*3.175*38*90° · HDCD326-0500
  • D0.50*3*3.175*38*90° · HDCD326-0500-04
  • D0.15*1*3.175*38*90° · HDCD326-0150-01
  • D1.00*3*3.175*38*90° · HDCD326-1000-04

04Frequently asked questions

What diameter range does this series cover?

The catalogue records a measured range of 0.15–3.17 mm for HDCD326. Individual diameters are listed in the part matrix above.

Which coatings are available on this series?

The primary coating recorded for the series is uncoated. Across the 5 part numbers on record, the coatings shown in section 03 are the ones actually assigned to those records.

Where does this series sit in the catalogue?

HDCD326 is listed on catalogue page —. Its capability note is: —. Use the part number or the full geometry string when enquiring.

05Adjacent series

Special and custom geometry

Other series in the same tooling family. Each opens its own specification and part matrix.

Back to all series