For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-0300-04-01 | Black-coated HSS drill | 0.3 | 5.5 | 3 | 38 | — | Standard |
| D0769-0510-04-01 | Black-coated HSS drill | 0.51 | 3 | 3 | 38 | — | Standard |
| D0769-0520-04-01 | Black-coated HSS drill | 0.52 | 3 | 3 | 38 | — | Standard |
| D0769-0520-15-02 | Black-coated HSS drill | 0.52 | 6 | 3 | 50 | 118° | Standard |
| D0769-0530-04-01 | Black-coated HSS drill | 0.53 | 3 | 3 | 38 | — | Standard |
| D0769-0540-04-01 | Black-coated HSS drill | 0.54 | 3 | 3 | 38 | — | Standard |
| D0769-0550-04-01 | Black-coated HSS drill | 0.55 | 6.2 | 3 | 48 | — | Standard |
| D0769-0550-04-02 | Black-coated HSS drill | 0.55 | 3 | 3 | 38 | — | Standard |
| D0769-0550-15-01 | Black-coated HSS drill | 0.55 | 6 | 3 | 50 | 118° | Standard |
| D0769-0560-04-01 | Black-coated HSS drill | 0.56 | 3 | 3 | 38 | — | Standard |
| D0769-0570-04-01 | Black-coated HSS drill | 0.57 | 3 | 3 | 38 | — | Standard |
| D0769-0580-04 | Black-coated HSS drill | 0.58 | 6.5 | 3 | 38 | — | Standard |
| D0769-0580-04-01 | Black-coated HSS drill | 0.58 | 3 | 3 | 38 | — | Standard |
| D0769-0590-04-01 | Black-coated HSS drill | 0.59 | 3 | 3 | 38 | — | Standard |
| D0769-0600-04-01 | Black-coated HSS drill | 0.6 | 3.5 | 3 | 38 | — | Standard |
| D0769-0610-04-01 | Black-coated HSS drill | 0.61 | 3.5 | 3 | 38 | — | Standard |
| D0769-0620-04-01 | Black-coated HSS drill | 0.62 | 5.5 | 3 | 38 | — | Standard |
| D0769-0620-04-02 | Black-coated HSS drill | 0.62 | 3.5 | 3 | 38 | — | Standard |
| D0769-0630-04-01 | Black-coated HSS drill | 0.63 | 8.19 | 3 | 50 | — | Standard |
| D0769-0630-04-02 | Black-coated HSS drill | 0.63 | 3.5 | 3 | 38 | — | Standard |
| D0769-0640-04-02 | Black-coated HSS drill | 0.64 | 3.5 | 3 | 38 | — | Standard |
| D0769-0650-04-02 | Black-coated HSS drill | 0.65 | 3.5 | 3 | 38 | — | Standard |
| D0769-0660-04-02 | Black-coated HSS drill | 0.66 | 3.5 | 3 | 38 | — | Standard |
| D0769-0670-04-02 | Black-coated HSS drill | 0.67 | 3.5 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.