For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-2500-15-01 | Coated HSS drill | 2.5 | 14 | 3 | 50 | 140° | Standard |
| D0769-2550-04-02 | Black-coated HSS drill | 2.55 | 14 | 3 | 46 | — | Standard |
| D0769-2600-04-02 | Black-coated HSS drill | 2.6 | 14 | 3 | 46 | — | Standard |
| D0769-2650-04-02 | Black-coated HSS drill | 2.65 | 14 | 3 | 46 | — | Standard |
| D0769-2700-04-02 | Black-coated HSS drill | 2.7 | 16 | 3 | 48 | — | Standard |
| D0769-2750-04-02 | Black-coated HSS drill | 2.75 | 16 | 3 | 46 | — | Standard |
| D0769-2780-04-01 | Black-coated HSS drill | 2.78 | 38 | 2.78 | 65 | — | Standard |
| D0769-2800-04-02 | Black-coated HSS drill | 2.8 | 16 | 3 | 46 | — | Standard |
| D0769-2850-04-01 | Black-coated HSS drill | 2.85 | 16 | 3 | 48 | — | Standard |
| D0769-2900-04-02 | Black-coated HSS drill | 2.9 | 16 | 3 | 48 | — | Standard |
| D0769-2920-04-01 | Black-coated HSS drill | 2.92 | 15.6 | 3 | 60 | — | Standard |
| D0769-2950-04-02 | Black-coated HSS drill | 2.95 | 16 | 3 | 48 | — | Standard |
| D0769-3000-04-01 | Black-coated HSS drill | 3 | 16 | 3 | 48 | — | Standard |
| D0769-3050-04-02 | Black-coated HSS drill | 3.05 | 18 | 4 | 50 | — | Standard |
| D0769-3100-04-02 | Black-coated HSS drill | 3.1 | 18 | 4 | 50 | — | Standard |
| D0769-3150-04-02 | Black-coated HSS drill | 3.15 | 18 | 4 | 50 | — | Standard |
| D0769-3200-04-02 | Black-coated HSS drill | 3.2 | 18 | 4 | 50 | — | Standard |
| D0769-3250-04-02 | Black-coated HSS drill | 3.25 | 18 | 4 | 50 | — | Standard |
| D0769-3300-04-01 | Black-coated HSS drill | 3.3 | 18 | 4 | 50 | — | Standard |
| D0769-3300-13-01 | Bronze-coated HSS drill | 3.3 | 18 | 4 | 50 | — | Standard |
| D0769-3350-04-02 | Black-coated HSS drill | 3.35 | 18 | 4 | 50 | — | Standard |
| D0769-3400-04-03 | Black-coated HSS drill | 3.4 | 20 | 4 | 52 | — | Standard |
| D0769-3400-15-01 | Black-coated HSS drill | 3.4 | 20 | 4 | 52 | — | Standard |
| D0769-3500-04-02 | Black-coated HSS drill | 3.5 | 20 | 4 | 52 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.