For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-1000-01-02 | Coated HSS drill | 1 | — | — | — | 130° | View full callout |
| D0769-1000-04-03 | Black-coated HSS drill | 1 | 6 | 3 | 38 | — | Standard |
| D0769-1000-10-01 | Coated HSS drill | 1 | 6 | 3 | 38 | — | Standard |
| D0769-1000-15-01 | Black-coated HSS drill | 1 | 12 | 3 | 60 | — | Standard |
| D0769-1000-T01 | Coated HSS drill | 1 | 6.5 | 1.5 | 32 | 130° | Standard |
| D0769-1010-04-01 | Black-coated HSS drill | 1.01 | 12.3 | 3 | 60 | — | Standard |
| D0769-1020-04-01 | Black-coated HSS drill | 1.02 | 12.3 | 3 | 60 | — | Standard |
| D0769-1020-04-02 | Black-coated HSS drill | 1.02 | 6 | 3 | 38 | — | Standard |
| D0769-1030-04-02 | Black-coated HSS drill | 1.03 | 6 | 3 | 38 | — | Standard |
| D0769-1040-04-02 | Black-coated HSS drill | 1.04 | 6 | 3 | 38 | — | Standard |
| D0769-1050-04-01 | Black-coated HSS drill | 1.05 | 12.3 | 3 | 38 | — | Standard |
| D0769-1050-04-02 | Black-coated HSS drill | 1.05 | 6 | 3 | 38 | — | Standard |
| D0769-1050-15-01 | Black-coated HSS drill | 1.05 | 12 | 3 | 60 | — | Standard |
| D0769-1060-04-02 | Black-coated HSS drill | 1.06 | 6 | 3 | 38 | — | Standard |
| D0769-1070-04-02 | Black-coated HSS drill | 1.07 | 7 | 3 | 39 | — | Standard |
| D0769-1080-04-02 | Black-coated HSS drill | 1.08 | 7 | 3 | 39 | — | Standard |
| D0769-1090-04-02 | Black-coated HSS drill | 1.09 | 7 | 3 | 39 | — | Standard |
| D0769-1100-04-02 | Black-coated HSS drill | 1.1 | 7 | 3 | 39 | — | Standard |
| D0769-1110-04-02 | Black-coated HSS drill | 1.11 | 7 | 3 | 39 | — | Standard |
| D0769-1110-04-03 | Black-coated HSS drill | 1.11 | 8.2 | 3 | 55 | — | Standard |
| D0769-1120-04-02 | Black-coated HSS drill | 1.12 | 7 | 3 | 39 | — | Standard |
| D0769-1130-04-02 | Black-coated HSS drill | 1.13 | 7 | 3 | 39 | — | Standard |
| D0769-1140-04-02 | Black-coated HSS drill | 1.14 | 7 | 3 | 39 | — | Standard |
| D0769-1150-03-01 | Coated HSS drill | 1.15 | 7 | 3 | 39 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.