For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-0680-04-02 | Black-coated HSS drill | 0.68 | 3.5 | 3 | 38 | — | Standard |
| D0769-0690-04-02 | Black-coated HSS drill | 0.69 | 3.5 | 3 | 38 | — | Standard |
| D0769-0700-04-02 | Black-coated HSS drill | 0.7 | 4.5 | 3 | 38 | — | Standard |
| D0769-0700-15-01 | Black-coated HSS drill | 0.7 | 10 | 3 | 50 | — | Standard |
| D0769-0710-04-02 | Black-coated HSS drill | 0.71 | 4.5 | 3 | 38 | — | Standard |
| D0769-0720-04-01 | Black-coated HSS drill | 0.72 | 10.2 | 3 | 48 | — | Standard |
| D0769-0720-04-02 | Black-coated HSS drill | 0.72 | 9.5 | 3 | 38 | — | Standard |
| D0769-0720-04-03 | Black-coated HSS drill | 0.72 | 4.5 | 3 | 38 | — | Standard |
| D0769-0730-04-02 | Black-coated HSS drill | 0.73 | 4.5 | 3 | 38 | — | Standard |
| D0769-0740-04-02 | Black-coated HSS drill | 0.74 | 4.5 | 3 | 38 | — | Standard |
| D0769-0750-04-01 | Black-coated HSS drill | 0.75 | 10.23 | 3 | 50 | — | Standard |
| D0769-0750-04-02 | Black-coated HSS drill | 0.75 | 4.5 | 3 | 38 | — | Standard |
| D0769-0750-15-02 | Black-coated HSS drill | 0.75 | 5 | 3 | 38 | — | Standard |
| D0769-0760-04-02 | Black-coated HSS drill | 0.76 | 4.5 | 3 | 38 | — | Standard |
| D0769-0770-04-02 | Black-coated HSS drill | 0.77 | 4.5 | 3 | 38 | — | Standard |
| D0769-0780-04-02 | Black-coated HSS drill | 0.78 | 4.5 | 3 | 38 | — | Standard |
| D0769-0790-04-02 | Black-coated HSS drill | 0.79 | 4.5 | 3 | 38 | — | Standard |
| D0769-0800-04-02 | Black-coated HSS drill | 0.8 | 5 | 3 | 38 | — | Standard |
| D0769-0810-04-01 | Black-coated HSS drill | 0.81 | 7 | 3 | 38 | — | Standard |
| D0769-0810-04-02 | Black-coated HSS drill | 0.81 | 5 | 3 | 38 | — | Standard |
| D0769-0820-04-01 | Black-coated HSS drill | 0.82 | 7 | 3 | 38 | — | Standard |
| D0769-0820-04-02 | Black-coated HSS drill | 0.82 | 10.25 | 3 | 50 | — | Standard |
| D0769-0820-04-03 | Black-coated HSS drill | 0.82 | 5 | 3 | 38 | — | Standard |
| D0769-0830 | HSS drill | 0.83 | 7 | 3 | 38 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.