For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-5600-15-01 | Black-coated HSS drill | 5.6 | 28 | 6 | 72 | — | Standard |
| D0769-6500-15-01 | Black-coated HSS drill | 6.5 | 31 | 8 | 75 | — | Standard |
| D0769-6800-15-01 | Black-coated HSS drill | 6.8 | 34 | 8 | 78 | — | Standard |
| D0769-6900-15-01 | Black-coated HSS drill | 6.9 | 34 | 8 | 78 | — | Standard |
| D0769-7000-15-01 | Black-coated HSS drill | 7 | 34 | 8 | 78 | — | Standard |
| D0769-7400-15 | Black-coated HSS drill | 7.4 | 42 | 8 | 75 | — | Standard |
| D0769-7800-15-01 | Black-coated HSS drill | 7.8 | 37 | 8 | 81 | — | Standard |
| D0769-8000-15-01 | Black-coated HSS drill | 8 | 37 | 8 | 81 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.