For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-1150-04-01 | Black-coated HSS drill | 1.15 | 12 | 3 | 39 | — | Standard |
| D0769-1150-04-02 | Black-coated HSS drill | 1.15 | 7 | 3 | 39 | — | Standard |
| D0769-1150-15-01 | Black-coated HSS drill | 1.15 | 16 | 3 | 60 | — | Standard |
| D0769-1160-04-02 | Black-coated HSS drill | 1.16 | 7 | 3 | 39 | — | Standard |
| D0769-1170-04-02 | Black-coated HSS drill | 1.17 | 7 | 3 | 39 | — | Standard |
| D0769-1180-04-02 | Black-coated HSS drill | 1.18 | 7 | 3 | 39 | — | Standard |
| D0769-1220-04-01 | Black-coated HSS drill | 1.22 | 8.3 | 3 | 55 | — | Standard |
| D0769-1250-04-01 | Black-coated HSS drill | 1.25 | 16.4 | 3 | 60 | — | Standard |
| D0769-1250-15-01 | Black-coated HSS drill | 1.25 | 16 | 3 | 60 | — | Standard |
| D0769-1350-04-01 | Black-coated HSS drill | 1.35 | 9 | 3 | 41 | — | Standard |
| D0769-1350-10-01 | Coated HSS drill | 1.35 | 9 | 3 | 41 | — | Standard |
| D0769-1400-04-02 | Black-coated HSS drill | 1.4 | 9 | 3 | 41 | — | Standard |
| D0769-1410-15-01 | Black-coated HSS drill | 1.41 | 18 | 3 | 60 | — | Standard |
| D0769-1450-04-02 | Black-coated HSS drill | 1.45 | 9 | 3 | 41 | — | Standard |
| D0769-1500-04-02 | Black-coated HSS drill | 1.5 | 9 | 3 | 41 | — | Standard |
| D0769-1550-04-01 | Black-coated HSS drill | 1.55 | 20.5 | 3 | 48 | — | Standard |
| D0769-1550-04-02 | Black-coated HSS drill | 1.55 | 20.5 | 3 | 60 | — | Standard |
| D0769-1550-04-03 | Black-coated HSS drill | 1.55 | 10 | 3 | 42 | — | Standard |
| D0769-1550-15-01 | Black-coated HSS drill | 1.55 | 20 | 3 | 60 | — | Standard |
| D0769-1575-10-01 | Coated HSS drill | 1.575 | 10 | 3 | 42 | — | Standard |
| D0769-1600-04-02 | Black-coated HSS drill | 1.6 | 10 | 3 | 42 | — | Standard |
| D0769-1650-04-02 | Black-coated HSS drill | 1.65 | 10 | 3 | 42 | — | Standard |
| D0769-1700-04-02 | Black-coated HSS drill | 1.7 | 10 | 3 | 42 | — | Standard |
| D0769-1800-04-02 | Black-coated HSS drill | 1.8 | 11 | 3 | 43 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.