For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-3550-04-02 | Black-coated HSS drill | 3.55 | 20 | 4 | 52 | — | Standard |
| D0769-3550-15-01 | Black-coated HSS drill | 3.55 | 20 | 4 | 60 | — | Standard |
| D0769-3600-04-02 | Black-coated HSS drill | 3.6 | 20 | 4 | 52 | — | Standard |
| D0769-3650-04-02 | Black-coated HSS drill | 3.65 | 20 | 4 | 52 | — | Standard |
| D0769-3700-04-02 | Black-coated HSS drill | 3.7 | 20 | 4 | 52 | — | Standard |
| D0769-3700-06-01 | DLC-coated HSS drill | 3.7 | 20 | 4 | 52 | — | Standard |
| D0769-3700-13-01 | Bronze-coated HSS drill | 3.7 | 20 | 4 | 52 | — | Standard |
| D0769-3750-04-02 | Black-coated HSS drill | 3.75 | 20 | 4 | 52 | — | Standard |
| D0769-3800-04-02 | Black-coated HSS drill | 3.8 | 22 | 4 | 54 | — | Standard |
| D0769-3850-04-02 | Black-coated HSS drill | 3.85 | 22 | 4 | 54 | — | Standard |
| D0769-3900-04-02 | Black-coated HSS drill | 3.9 | 22 | 4 | 54 | — | Standard |
| D0769-3950-04-02 | Black-coated HSS drill | 3.95 | 22 | 4 | 54 | — | Standard |
| D0769-4100-04-01 | Black-coated HSS drill | 4.1 | 22 | 6 | 66 | — | Standard |
| D0769-4200-04-01 | Black-coated HSS drill | 4.2 | 22 | 6 | 66 | — | Standard |
| D0769-4300-10-01 | Coated HSS drill | 4.3 | 24 | 6 | 68 | — | Standard |
| D0769-4900-04-02 | Black-coated HSS drill | 4.9 | 52 | 6 | 94 | — | Standard |
| D0769-4900-10-02 | Coated HSS drill | 4.9 | 52 | 6 | 94 | — | Standard |
| D0769-5050-15-01 | Black-coated HSS drill | 5.05 | 52.1 | 6 | 100 | — | Standard |
| D0769-5100-10-01 | Coated HSS drill | 5.1 | 26 | 6 | 70 | — | Standard |
| D0769-5100-13-01 | Coated HSS drill | 5.1 | 26 | 6 | 70 | — | Standard |
| D0769-5100-15-01 | Black-coated HSS drill | 5.1 | 26 | 6 | 70 | — | Standard |
| D0769-5500-15-01 | Black-coated HSS drill | 5.5 | 28 | 6 | 72 | — | Standard |
| D0769-5600-10-01 | Coated HSS drill | 5.6 | 28 | 6 | 72 | — | Standard |
| D0769-5600-13-01 | Coated HSS drill | 5.6 | 28 | 6 | 72 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.