For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-1850-04-01 | Black-coated HSS drill | 1.85 | 11 | 3 | 43 | — | Standard |
| D0769-1950-04-02 | Black-coated HSS drill | 1.95 | 12 | 3 | 44 | — | Standard |
| D0769-2000-04-01 | Black-coated HSS drill | 2 | 13 | 3 | 44 | — | Standard |
| D0769-2000-10-01 | Coated HSS drill | 2 | 13 | 3 | 44 | — | Standard |
| D0769-2010-04 | Black-coated HSS drill | 2.01 | 23.6 | 3 | 70 | — | Standard |
| D0769-2050-04-02 | Black-coated HSS drill | 2.05 | 12 | 3 | 44 | — | Standard |
| D0769-2050-15-02 | Black-coated HSS drill | 2.05 | 23 | 3 | 70 | — | Standard |
| D0769-2050-T01 | Coated HSS drill | 2.05 | 30 | 3 | 60 | — | Standard |
| D0769-2100-04-02 | Black-coated HSS drill | 2.1 | 12 | 3 | 44 | — | Standard |
| D0769-2100-15-01 | Black-coated HSS drill | 2.1 | 23 | 3 | 70 | — | Standard |
| D0769-2150-04-02 | Black-coated HSS drill | 2.15 | 13 | 3 | 45 | — | Standard |
| D0769-2200-04-02 | Black-coated HSS drill | 2.2 | 13 | 3 | 45 | — | Standard |
| D0769-2220-04-01 | Black-coated HSS drill | 2.22 | 13 | 3 | 45 | — | Standard |
| D0769-2220-10-01 | Coated HSS drill | 2.22 | 13 | 3 | 45 | — | Standard |
| D0769-2220-13-01 | Coated HSS drill | 2.22 | 13 | 3 | 45 | — | Standard |
| D0769-2250-04-02 | Black-coated HSS drill | 2.25 | 13 | 3 | 45 | — | Standard |
| D0769-2250-15-01 | Black-coated HSS drill | 2.25 | 26 | 3 | 70 | — | Standard |
| D0769-2270-04-01 | Black-coated HSS drill | 2.27 | 13 | 3 | 45 | — | Standard |
| D0769-2270-10-01Repeat order | Coated HSS drill | 2.27 | 13 | 3 | 45 | — | Standard |
| D0769-2300-04-02 | Black-coated HSS drill | 2.3 | 13 | 3 | 45 | — | Standard |
| D0769-2350-04-01 | Black-coated HSS drill | 2.35 | 13 | 3 | 45 | — | Standard |
| D0769-2400-04-02 | Black-coated HSS drill | 2.4 | 14 | 3 | 46 | — | Standard |
| D0769-2450-04-02 | Black-coated HSS drill | 2.45 | 14 | 3 | 46 | — | Standard |
| D0769-2500-04-02 | Black-coated HSS drill | 2.5 | 14 | 3 | 46 | — | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.