For process engineers
The table is a production record, not a sales range.
D0769 — Black-coated HSS drill
A real production series with 200 standard part numbers. The table below is taken from the geometry we have actually ground and shipped.
- Part numbers in series
- 200
- Diameter span
- 0.3–8 mm
- Coating
- Black
What the catalogue commits to
Production capability
Min. diameter 0.10 mm
Typical application
HSS micro drilling as a lower-cost alternative on soft materials.
Part numbers in D0769
200 part numbersFilter this series further
| Part no. | Description | D1 mm | Flute mm | Shank mm | OAL mm | Point | Geometry |
|---|---|---|---|---|---|---|---|
| D0769-0830-04-02 | Black-coated HSS drill | 0.83 | 5 | 3 | 38 | — | Standard |
| D0769-0840-04-01 | Black-coated HSS drill | 0.84 | 10.25 | 3 | 50 | — | Standard |
| D0769-0840-04-02 | Black-coated HSS drill | 0.84 | 5 | 3 | 38 | — | Standard |
| D0769-0850-04-02 | Black-coated HSS drill | 0.85 | 5 | 3 | 38 | — | Standard |
| D0769-0860-04-02 | Black-coated HSS drill | 0.86 | 5 | 3 | 38 | — | Standard |
| D0769-0870-04-02 | Black-coated HSS drill | 0.87 | 5 | 3 | 38 | — | Standard |
| D0769-0880-04-02 | Black-coated HSS drill | 0.88 | 5 | 3 | 38 | — | Standard |
| D0769-0890-04-02 | Black-coated HSS drill | 0.89 | 5 | 3 | 38 | — | Standard |
| D0769-0900-04-01 | Black-coated HSS drill | 0.9 | 15 | 3 | 50 | 118° | Standard |
| D0769-0900-04-02 | Black-coated HSS drill | 0.9 | 5.5 | 3 | 38 | — | Standard |
| D0769-0910-04-02 | Black-coated HSS drill | 0.91 | 5.5 | 3 | 38 | — | Standard |
| D0769-0920-04-01 | Black-coated HSS drill | 0.92 | 12.28 | 3 | 50 | — | Standard |
| D0769-0920-04-02 | Black-coated HSS drill | 0.92 | 5.5 | 3 | 38 | — | Standard |
| D0769-0930-04-02 | Black-coated HSS drill | 0.93 | 5.5 | 3 | 38 | — | Standard |
| D0769-0930-15-01 | Black-coated HSS drill | 0.93 | 12 | 3 | 50 | — | Standard |
| D0769-0940-04-02 | Black-coated HSS drill | 0.94 | 5.5 | 3 | 38 | — | Standard |
| D0769-0950-04-01 | Black-coated HSS drill | 0.95 | 12.29 | 3 | 50 | — | Standard |
| D0769-0950-04-02 | Black-coated HSS drill | 0.95 | 5.5 | 3 | 38 | — | Standard |
| D0769-0960-04-02 | Black-coated HSS drill | 0.96 | 5.5 | 3 | 38 | — | Standard |
| D0769-0970-04-02 | Black-coated HSS drill | 0.97 | 5.5 | 3 | 38 | — | Standard |
| D0769-0970-15-01 | Black-coated HSS drill | 0.97 | 6.3 | 3 | 50.3 | — | Standard |
| D0769-0980-04-02 | Black-coated HSS drill | 0.98 | 5.5 | 3 | 38 | — | Standard |
| D0769-0990-04-02 | Black-coated HSS drill | 0.99 | 5.5 | 3 | 38 | — | Standard |
| D0769-1000-01-01 | Coated HSS drill | 1 | 6.5 | 1.5 | 32 | 130° | Standard |
How to read a part number. The prefix is the series, the four digits after the first dash encode the cutting diameter in thousandths of a millimetre (for example 1000 is 1.000 mm), and any trailing digits identify the flute or variant. The full geometry is written as D1 × flute length × shank × overall length.